Specialty Tools

The 1800 Watt Portable Power Station and Parallel Battery Charger allows for AC power in remote locations for convenient portable power. Able to run most corded tools, it provides 1800 Watts (15 amps) continuous power and 3600 Watts peak power. The DCB1800B runs on four DEWALT 20V MAX batteries (including FLEXVOLT), and for high power applications, four 20V MAX 3.0Ah DEWALT Batteries (DCB200) or higher amp hour are recommended to provide the best results. Not only can the 1800 Watt Portable Power Station power a corded tool remotely, but it also becomes a multi-port parallel charger for up to four DEWALT 20V MAX Batteries (including FLEXVOLT) when plugged into a wall outlet via extension cord (batteries and extension cord sold separately). Compact and lightweight, the 1800 Watt Portable Power Station weighs just 18lbs (without batteries) and is easily portable. Without the need for gas to run, there are no fumes or carbon monoxide emitted from the device. In addition, the 1800 Watt Portable Power Station can be used to provide temporary power in areas where noise is restricted such as a jobsite with strict regulations. With an integrated temperature-controlled cooling fan and heavy-duty roll cage, the Portable Power Station is a durable and convenient power solution for a variety of uses.

FEATURES

• 1800 Watt Portable Power Station
• 4 Port Parallel Charger
• Four 20V MAX batteries in (including FLEXVOLT), 15 amps out
• Batteries and extension cord sold seperately
• Runs most variable speed power tools

SPECIFICATIONS

• 120V Receptacles 1
• Charging connection: Male 120V plug
• Batteries compatible: 20V MAX
• Charging time: 2 Hours, 4.0 Ah battery
• Height: 10.75 IN
• Length: 12.75 IN
• Width: 21.30 IN
• Shipping weight: 22 lbs
• Weight without batteries: 18 lbs
• Required number of batteries: 4
• Rated current (120V/240V): 15 amps
• Max curent (120V/240V): 30 amps
• Rated AC output: 1800 Watts
• MAX AC output: 3600 Watts
• Temperature range: 32-104 degrees F (0-40 degrees C)
• Batteries compatible: 20V MAX
• Charging rate: 2.0 amps
• Compatible with: 20V MAX batteries
• Indicator lights: Inverter and charger, operation and fault, low battery
• Quantity of batteries charged: 4
• Sequential or simultaneous charging: Simultaneous
• Sinewave type: Modified

DESCRIPTION:

Our 20V MAX* Corded/Cordless Air Inflator can run on any one of three power sources** for maximum versatility: 20V MAX* battery, 12V DC, or 110V AC. Use it on the jobsite, or on the go. It features a high-pressure rubber hose for durability. The threaded chuck and included onboard accessories make it easy to inflate items from tires to footballs. Setting desired air pressure is simple with the digital gauge, and the auto-shutoff provides accurate inflation. The high-volume hose allows fast inflation of mattresses and other inflatables with the push of a button. Move the hose to the deflation port for quick and easy take down. An onboard LED light helps to provide illumination in dark spaces. Heavy-duty rubber feet help reduce walking while in use. **Battery, charger, and AC power adapter sold separately.

FEATURES:

• High-pressure inflation mode with automatic shutoff
• High-volume inflation and deflation modes
• LED light helps to provide illumination
• Three power sources** for inflation on a jobsite and on the go (**20V MAX* battery, 12V DC, or 110V AC)
• Convenient onboard accessory storage
• Heavy-duty rubber feet help reduce walking when in use
• Threaded chuck for secure connection to inflation valve

SPECIFICATIONS:

• POWER SUPPLY 20V MAX*, 12V DC, 110V AC** (**AC POWER ADAPTER SOLD SEPARATELY)
• TOOL HEIGHT 9.8 IN
• TOOL LENGTH 5.2 IN
• TOOL WEIGHT 5.5 LBS
• TOOL WIDTH 11.9 IN

INCLUDES:

• DCC020I Air Inflator
• 12V DC Power Cord
• High-Pressure Tapered Nozzle
• Presta Valve Adapter
• Inflator Needle

Clear drains with less setup. The 20V MAX XR Brushless Drain Snake is a cordless solution that uses the same battery and charger as your other 20V MAX tools. It comes equipped with a 5/16” x 25’ Black Oxide Drain Cable with Bulb Head, and the removable inner drum can accept up to 3/8” x 35’ cable for pipes up to 3”.

Features:

• Removable drum accepts up to 3/8" x 35' cable for use in up to 3" pipes
• Fixed outer shroud helps protect surfaces from rotating drum
• Pivoting LED light with 3 brightness modes to help provide illumination
• Sliding nose cone allows for quick locking/releasing of cable
• Ergonomic handle for comfortable grip
• Variable speed trigger with drill-style inline forward/reverse for ease of use

Includes:

• DCD200 Drain Snake
• DCD2005 5/16" X 25' Black Oxide Drain Cable with Bulb Head
• DCB203 2.0 Ah Battery
• DCB113 Charger
• Kitbox

The DEWALT Electrical Cable Cutting Tool Replacement Blade is used on the DCE150 Cable Cutting Tool. The hardened steel cutting blade provides long life, can be self-serviced, and is easily replaceable in the field.

FEATURES

• Cuts up to 750 MCM Copper and 1000 MCM Aluminum cableCan be easily serviced and replaced in the field

SPECIFICATIONS

• CABLE CAPACITY 750 MCM CU / 1000 MCM AL

INCLUDES

• (1) DCE1501 Cable Cutting Tool Replacement Blade

• Able to cut up to 750 MCM Copper and 1000 MCM Aluminum Cable
• Bright LED light to help illuminate cutting surface
• Cable Capacity: 750MCM Cu/11000 MCM Al
• Easily accessible forward/reverse switch
• Easily replaceable cutting blade

• Able to cut up to 750 MCM Copper and 1000 MCM Aluminum Cable
• Bright LED light to help illuminate cutting surface
• Cable Capacity: 750MCM Cu/11000 MCM Al
• Easily accessible forward/reverse switch
• Easily replaceable cutting blade

Features and Specifications:

• Cuts up to 750 MCM Copper
• Also cuts 1000 MCM Aluminum cable
• Hardened steel cutting blades ensure long service life
• Bright LED light illuminates the cutting surface
• Easy to replace cutting blade
• Padded shoulder strap with connection ring
• Easily accessible inline forward / reverse switch for one-handed operation
• Comfortable, durable rubber overmold grip
• Hang hook
• Height: 14″
• Length: 6-1/2″
• Weight: 6.7 lbs

Includes:

• DCE150B 20V Max Cable Cutting Tool
• DCB203 20V MAX Compact XR 2.0Ah Li-Ion Battery Pack
• DCB115 12V MAX – 20V MAX Battery Charger
• Shoulder Strap
• Hang Hook

REFURBISHED - Tool will be marked with an "R"

Features and Specifications:

• Cuts up to 750 MCM Copper
• Also cuts 1000 MCM Aluminum cable
• Hardened steel cutting blades ensure long service life
• Bright LED light illuminates the cutting surface
• Easy to replace cutting blade
• Padded shoulder strap with connection ring
• Easily accessible inline forward / reverse switch for one-handed operation
• Comfortable, durable rubber overmold grip
• Hang hook
• Height: 14″
• Length: 6-1/2″
• Weight: 6.7 lbs

Includes:

• DCE150B 20V Max Cable Cutting Tool
• DCB203 20V MAX Compact XR 2.0Ah Li-Ion Battery Pack
• DCB115 12V MAX – 20V MAX Battery Charger
• Shoulder Strap
• Hang Hook

The DCE151 20V MAX XR Brushless Cable Stripper is a dedicated, powered tool for cleanly and consistently stripping electrical cable up to 4" without an exposed knife. It quickly strips copper and aluminum cable from #6 AWG to 750 MCM Cu and 900 MCM Al. This kit includes a DCB203 20V MAX XR battery (2.0 AH), a charger, 20 quick release bushings, and a convenient kit box with storage. A bushing compatibility reference chart is included below. Put down the blade with this innovative solution for large diameter cable stripping.

The 20V MAX Cordless Cable Stripper helps speed jobsite productivity. We put it on the clock vs. a standard knife to prove it.

FEATURES

• Depth gauge consistently strips cables up to 4"
• Strip #6 - 750 MCM Cu/900 MCM Al Cable
• Quick release bushings allow you to quickly change bushings for each cable size
• Variable speed trigger with reverse for speed control
• Adjustable onboard LED light helps to provide illumination in dark or low light situations
• Kit box comes with convenient storage for tool, bushings, battery and charger
• E-Clutch system helps the user maintain control of the tool if it becomes jammed.
• Uses DEWALT bushings. Compatible with Greenlee and Ripley bushings.

SPECIFICATIONS

• AL CABLE CAPACITY RANGE #6 AWG TO 900 CM 
• CABLE TYPE THHN CU, XHHW CU, THHN AL, XHHW AL
• CU CABLE CAPACITY RANGE #6 AWG TO 750 MCM 
• DEPTH OF STRIP 4"
• LED LIGHT YES 
• POWER TOOL TYPE CORDLESS
• SYSTEM 20V MAX 
• TOOL HEIGHT 6.95 IN
• TOOL LENGTH 10.39 IN 
• TOOL WEIGHT 2.4 LBS

INCLUDES

• DCE151 Cable Stripper
• (1) DCB203 2 Ah battery
• Charger
• Bushings DCE1511-DCE1524
• Kit box

FEATURES

• Press 1/2" - 4" Copper Pipe and stainless steel
• Press 1/2" - 2" Black Carbon steel and PEX pipe
• Crimp Connect® software, an onboard intelligence system provides ability to print detailed reports of the date, time, force, and successfully completed cycles of the presses completed by the tool as well as the tools calibration and service history
• Onboard diagnostics indicates battery life, success of crimp, service needed and operating temperature range
• Easily accessible forward/reverse switch for ease of use
• Bright LED light helps to illuminate work area
• Shoulder strap and connection ring for portability

SPECIFICATIONS

• FORCE 4 TONS
• HANDLE CONFIGURATION PISTOL GRIP
• MATERIAL CARBON STEEL
• PIPE CAPACITY 4 IN
• POWER TOOL TYPE CORDLESS
• SYSTEM 20V MAX*
• TOOL HEIGHT 14 IN
• TOOL LENGTH 15.5 IN
• TOOL WEIGHT 7.16 LBS

INCLUDES

• DCE200
• (2) DCB204 4 Ah Li-Ion batteries
• DCE115 Charger
• Shoulder Strap
• Kitbox

REFURBISHED TOOL - TOOL WILL BE MARKED WITH "R"

FEATURES

• Press 1/2" - 4" Copper Pipe and stainless steel
• Press 1/2" - 2" Black Carbon steel and PEX pipe
• Crimp Connect® software, an onboard intelligence system provides ability to print detailed reports of the date, time, force, and successfully completed cycles of the presses completed by the tool as well as the tools calibration and service history
• Onboard diagnostics indicates battery life, success of crimp, service needed and operating temperature range
• Easily accessible forward/reverse switch for ease of use
• Bright LED light helps to illuminate work area
• Shoulder strap and connection ring for portability

SPECIFICATIONS

• FORCE 4 TONS
• HANDLE CONFIGURATION PISTOL GRIP
• MATERIAL CARBON STEEL
• PIPE CAPACITY 4 IN
• POWER TOOL TYPE CORDLESS
• SYSTEM 20V MAX*
• TOOL HEIGHT 14 IN
• TOOL LENGTH 15.5 IN
• TOOL WEIGHT 7.16 LBS

INCLUDES

• DCE200
• (2) DCB204 4 Ah Li-Ion batteries
• DCE115 Charger
• Shoulder Strap
• Kitbox

FEATURES

• Press 1/2" - 4" Copper Pipe and stainless steel
• Press 1/2" - 2" Black Carbon steel and PEX pipe
• Crimp Connect® software, an onboard intelligence system provides ability to print detailed reports of the date, time, force, and successfully completed cycles of the presses completed by the tool as well as the tools calibration and service history
• Onboard diagnostics indicates battery life, success of crimp, service needed and operating temperature range
• Easily accessible forward/reverse switch for ease of use
• Bright LED light helps to illuminate work area
• Shoulder strap and connection ring for portability

SPECIFICATIONS

• FORCE 4 TONS
• HANDLE CONFIGURATION PISTOL GRIP
• MATERIAL CARBON STEEL
• PIPE CAPACITY 4 IN
• POWER TOOL TYPE CORDLESS
• SYSTEM 20V MAX*
• TOOL HEIGHT 14 IN
• TOOL LENGTH 15.5 IN
• TOOL WEIGHT 7.16 LBS

INCLUDES

• DCE200
• Set of 6 Crimping heads: 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″
• (2) DCB204 4 Ah Li-Ion batteries
• DCE115 Charger
• Shoulder Strap
• Kitbox

Features and Specifications:

• 750 MCM Cu / 750 Al Crimping Capacity for Copper and Aluminum Cable
• UL Classified to be compatible with leading manufactures connectors and U Type Dies
• Crimp Connect ™ Reporting Technology provides detailed reports of work done
• On-board diagnostics indicates battery life, successful crimp, service needed, and operating temperature range
• Bright LED Work light illuminates work area
• Electroless Nickel corrosion protective coating on crimping head
• Easily accessible forward and reverse triggers for increased ease of use
• Shoulder strap and connection ring for added portability
• Force: 12 tons
• Cable capacity: 750 Copper/1,000 Aluminum MCM
• Die type: U-type
• Height: 14″
• Length: 17-1/2″
• Weight: 14.6 lbs

On Board Diagnostics indicates:

• Battery life
• Successful crip
• Service needed
• Operating temperature range

Includes:

• DCE300 20V Max Died Crimping Tool
• Two DCB204 20V Max 4.0Ah Lithium Ion batteries
• DCE115 Charger
• Shoulder strap
• Kit box

REFURBISHED - Tool will be marked with an "R"

Features and Specifications:

• 750 MCM Cu / 750 Al Crimping Capacity for Copper and Aluminum Cable
• UL Classified to be compatible with leading manufactures connectors and U Type Dies
• Crimp Connect ™ Reporting Technology provides detailed reports of work done
• On-board diagnostics indicates battery life, successful crimp, service needed, and operating temperature range
• Bright LED Work light illuminates work area
• Electroless Nickel corrosion protective coating on crimping head
• Easily accessible forward and reverse triggers for increased ease of use
• Shoulder strap and connection ring for added portability
• Force: 12 tons
• Cable capacity: 750 Copper/1,000 Aluminum MCM
• Die type: U-type
• Height: 14″
• Length: 17-1/2″
• Weight: 14.6 lbs

On Board Diagnostics indicates:

• Battery life
• Successful crip
• Service needed
• Operating temperature range

Includes:

• DCE300 20V Max Died Crimping Tool
• Two DCB204 20V Max 4.0Ah Lithium Ion batteries
• DCE115 Charger
• Shoulder strap
• Kit box

Features and Specifications:

• 750 MCM Crimping Capacity for Copper and Aluminum Cable
• Crimp Connect ™ Reporting Technology provides detailed reports of work done
• Patented Guard Rails protect the crimping head when crimping small diameter cable
• Bright LED Work light illuminates work area
• Easily accessible forward and reverse triggers for increased ease of use
• 360° pivoting head allows the crimper to maneuver in tight spaces
• Shoulder strap and connection ring for added portability
• Force: 6 tons
• Cable capacity: 750 Copper/1,000 Aluminum MCM
• Height: 15-1/2″
• Length: 17-1/2″
• Weight: 11.2 lbs

On Board Diagnostics indicates:

• Battery life
• Successful crip
• Service needed
• Operating temperature range

Features and Specifications:

• 750 MCM Crimping Capacity for Copper and Aluminum Cable
• Crimp Connect ™ Reporting Technology provides detailed reports of work done
• Patented Guard Rails protect the crimping head when crimping small diameter cable
• Bright LED Work light illuminates work area
• Easily accessible forward and reverse triggers for increased ease of use
• 360° pivoting head allows the crimper to maneuver in tight spaces
• Shoulder strap and connection ring for added portability
• Force: 6 tons
• Cable capacity: 750 Copper/1,000 Aluminum MCM
• Height: 15-1/2″
• Length: 17-1/2″
• Weight: 11.2 lbs

On Board Diagnostics indicates:

• Battery life
• Successful crip
• Service needed
• Operating temperature range

Expand PEX Type-A tubing from 3/8 in. to 1 in. with the 20V MAX* Cordless 1 in. PEX Expander, the fastest PEX Expander on the market.** It’s proudly made in the USA with global materials. An automatic rotating head helps to ensure even expansion. The bright onboard LED work light and full trigger actuation make it an excellent tool in dimly lit, tight spaces. Carry this tool conveniently around the jobsite with a dual-sided hang hook and belt hook. Rubber overmold on the handle provides an ergonomic grip to keep you comfortable all day. This tool uses DEWALT PEX Heads, and it is compatible with leading competitive PEX heads.

FEATURES

• Expands 3/8 in. - 1 in. Pex Type-A tubing
• Automatic rotating head action for even expansion
• Full trigger actuation for use in tight spaces
• Bright LED work light to help illuminate dark areas
• Dual-sided hang and belt hooks for convenient storage
• Rubber overmold for comfortable, ergonomic grip
• Uses DEWALT PEX Heads. Compatible with Milwaukee and Uponor Heads.

SPECIFICATIONS

INCLUDES

• DCE400 PEX Expander
• (2) DCB203 Batteries
• Charger
• (3) Expander Heads (1/2 in., 3/4 in., 1 in.)
• PEX Expander Grease
• Kit Box

Enhance performance and comfort on hot work days with the 20V MAX Cordless Jobsite Fan which delivers a powerful, concentrated air flow. With 20V MAX compatibility, you can power this tool with the same battery you use with your other adaptable cordless tools. Conveniently stand it up, hang it, or mount it where you need so it is not in the way and choose the power setting you want with variable speed control.

Specifications

• Diameter 11 in.
• Height (in) 16 in
• Weight 6 lbs