Combo Kits
This 2-tool combo Kit includes the DCD999 20V MAX* 1/2 in. Hammer Drill/Driver with FLEXVOLT ADVANTAGE tool technology. It gets up to 42% more power** when paired with FLEXVOLT batteries (FLEXVOLT Batteries sold separately). This kit comes with one DCF887 20V MAX* XR Cordless Impact driver, two DCB205 20V MAX* 5.0Ah batteries, a fast charger, and kit bag.
FEATURES
- The DCD999 Hammer Drill gets up to 42% more power** when paired with FLEXVOLT batteries
- Both tools compatible with all DEWALT 20V MAX* and FLEXVOLT Batteries
- 20X BRIGHTER LED: The DCD999 3-mode LED provides lighting in dark or confined spaces up to 20x brighter than the DEWALT DCD985
- EXTENDED WORK TIME WITH LED: The DCD999 features an LED spotlight mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces
- VERSATILITY: The DCF887 has application versatility with 3-speed settings
- ADDED CONTROL: The DCF887 helps prevent over-tightening fasteners with added control from Precision Drive in speed 1 setting
- VISIBILITY: The DCF887 creates visibility without shadows from 3 LEDs with a 20-second delay after trigger is released
- COMPATIBILITY: The DCB118 8 Amp Fast Charger is compatible with 20V MAX* batteries and FLEXVOLT 20V/60V MAX* batteries.
- DCD999 is Tool Connect Chip Ready: Chip pocket accepts Tool Connect Chip DCE042 and connects with Tool Connect Site Manager app for easy asset management on the jobsite. (DCE042 sold separately)
SPECIFICATIONS
- AMP HOUR 5 AH
- BATTERY TYPE 20V MAX* LITHIUM ION
- BRUSHLESS TRUE
- CASE TYPE SOFT
- CHARGER INCLUDED YES
- HAMMER DRILL INCLUDED TRUE
- IMPACT DRIVER INCLUDED TRUE
- NUMBER OF BATTERIES INCLUDED 2
- NUMBER OF TOOLS 2
- POWER TOOL TYPE CORDLESS
- PRODUCT TYPE INCLUDED HAMMER DRILL , IMPACT DRIVER
- SYSTEM 20V MAX*
INCLUDES
- (1) DCD999B 20V MAX* 1/2 in. Brushless Cordless Hammer Drill/Driver with FLEXVOLT Advantage
- (1) DCF887 20V MAX*1/4 in. XR Brushless Cordless Impact Driver
- (2) DCB205 20V MAX* Lithium Ion 5.0Ah battery
- (1) DCB118 8 Amp Fast Charger
- (2) Belt Hooks
- (1) Kit Bag
Two piece combo kit consisting of the DCF620 Brushless Drywall Screw along with DCS551 Drywall Cut-out Tool
- Screwgun has 4,400rpm speed provides corded performance - without the cord.
- Both tools have DEWALT-built motors that delivers maximum runtime
- Screwgun is balance and ergonomic - comparable to the DW272 DEWALT corded screwgun
- Cut out tool provides dust sealed switch to protect the tool long term and 26,000 rpm
- Both tools have a bright LED light to provide greater visibility
Specifications:
| Voltage | 20V |
|---|---|
| No Load Speed | 0-4,400rpm |
| Voltage | 20v |
| Drive | 1/4" Hex |
| No Load Speed | 26,000 rpm |
| Collet Diameter | 1/4', 1/8" |
| Adjustable Guide | Yes |
| Spindle Lock | Yes |
The DEWALT DCK267D2 20V MAX XR Drywall Screw gun & Impact Driver Kit (2.0Ah) features DEWALT built brushless motors in both units that delivers maximum run time, and run on XR Li-Ion batteries (with fuel gauge) which provide 33% more capacity over standard packs. The Impact driver has one-handed loading 1/4" hex chuck accepts 1" bit tips It is has a compact (5.55" front to back) and lightweight (2.9 lbs) design to fit into tight areas. The Screw gun has up to 4,400 rpm provides greater speed than DW272 corded screw gun. The Screw gun is also balanced and ergonomic - comparable than the DW272 DEWALT corded screw gun. Belt hook included on both units for portability as well as LEDs for increased visibility.
FEATURES
- DEWALT built brushless motor in both units that delivers maximum run time
- XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs
- Impact driver has compact (5.55" front to back) and lightweight (2.9 lbs) design to fit into tight areas
- Screwgun has up to 4,400 rpm provides greater speed than DW272 corded screwgun
- Screwgun is balanced and ergonomic - comparable than the DW272 DEWALT corded screwgun
- Impact driver has one-handed loading 1/4" hex chuck accepts 1" bit tips
- Belt hook included on both units for portability as well as LEDs for increased visibility
INCLUDES
- DCF887 20V MAX XR 1/4" 3-Speed Impact Driver
- DCF620 20V MAX XR Drywall Screwgun
- (2) DCB203 20V MAX XR 2.0AH Battery Packs
- Charger
- Contractor Bag
- (2) Belt Hooks
This 20V MAX* cordless kit includes one drywall screwgun, impact, two 4.0Ah batteries, and a charger. The DCF887 is only 5.55 in. front to back and lightweight at only 2.9 lbs for use in tight spaces. The DCF620 drywall screwgun has up to 4,400 rpms and a brushless motor for maximum runtime.
FEATURES
- DEWALT built brushless motor in both units that delivers maximum run time
- XR® Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs
- Impact driver has compact (5.55" front to back) and lightweight (2.9 lbs) design to fit into tight areas
- Screwgun has up to 4,400 rpm provides greater speed than DW272 corded screwgun
- Screwgun is balanced and ergonomic - comparable than the DW272 DEWALT corded screwgun
- Impact driver has one-handed loading 1/4" hex chuck accepts 1" bit tips
- Belt hook included on both units for portability as well as LEDs for increased visibility
- 3-speed settings on impact driver for optimized application versatility
- Precision drive in speed 1 for precision applications and added control
SPECIFICATIONS
- NUMBER OF TOOLS: 2
- POWER TOOL TYPE: CORDLESS
- PRODUCT TYPE INCLUDED: IMPACT DRIVER , SCREWGUN
- SYSTEM: 20V MAX*
INCLUDES
- DCF620 20V MAX* XR Drywall Screwgun
- DCF887 20V MAX* XR 1/4" 3-Speed Impact Driver
- (2)DCB204 20V MAX* XR 4.0AH Battery Pack
- Charger
- Contractor Bag
- (2) Belt Clips
The DCK283D2 20V MAX* XR Lithium Ion Brushless Compact Drill / Driver and Impact Driver Combo Kit has a powerful motor to deliver maximum runtime. Features a lightweight, compact design to fit in tight spaces. 3-mode LED light gives users visibility in dark spaces.
FEATURES
- DEWALT brushless motor delivers up to 57% more run-time over brushed
- XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs
- DCD791 20V MAX* 1/2" drill/driver has a compact (6.9" front to back) and lightweight (3.4 lb) design to fit into tight areas
- DCF887 20V MAX* 1/4" impact driver has a compact (5.3" front to back) design to fit into tight areas
- DCD791 features 3-mode LED with 20-minute trigger release delay in Spotlight Mode providing increased visibility in dark or confined spaces
- DCF887 features 3 LED lights imbedded in front of tool with 20-second trigger release delay providing increased visibility in dark or confined spaces
SPECIFICATIONS
- Number Of Tools 2
- Power Tool Type Cordless
- Product Type Included Drill, Impact Driver
- System 20v Max
INCLUDES
- DCD791 20V MAX* XR Lithium Ion Compact Brushless 1/2" Drill/Driver
- DCF887 20V MAX* XR Lithium Ion Brushless 1/4" Impact Driver
- (2) DCB203 20V MAX XR Lithium Ion Battery (2.0AH)
- Charger
- (2) Belt Hooks
- Contractor Bag
The 20V MAX* XR Lithium Ion Cordless Compact Hammer Drill and Impact Driver Combo Kit has a powerful motor to deliver maximum runtime. It features a lightweight, compact design to fit in tight spaces. The 3-mode LED gives users visibility in dark spaces. This model is manufactured in the U.S.A. with global materials.
FEATURES
- Brushless motor delivers up to 57% more runtime over brushed
- Lithium Ion batteries with fuel gauge provide 33% more capacity over standard packs
- DCD796 20V MAX* 1/2 in. Hammer Drill has a compact (7.5 in. front to back) and lightweight (3.6 lbs) design to fit into tight areas
- DCF887 20V MAX* ¼ in. Impact Driver has a compact (5.3 in. front to back) design to fit into tight areas
- DCD796 features 3-mode LED with 20-minute trigger release delay in Spotlight Mode providing increased visibility in dark or confined spaces
- DCF887 features 3 LEDs embedded in front of tool with 20-second trigger release delay providing increased visibility in dark or confined spaces
SPECIFICATIONS
- NUMBER OF TOOLS: 2
- POWER TOOL TYPE: CORDLESS
- PRODUCT TYPE: INCLUDED HAMMER DRILL , IMPACT DRIVER
- SYSTEM: 20V MAX*
INCLUDES
- DCD796 20V MAX* XR Brushless Compact 1/2 in. Cordless Hammer Drill
- DCF887 20V MAX* XR Brushless 1/4 in. Impact Driver
- (2) DCB203 20V MAX* XR Lithium Ion Battery (2.0AH)
- Charger
- (2) Belt Hooks
- Contractor Bag
The DEWALT DCK483D2 is ideal for most drilling, fastening and cutting applications. This kit includes a Drill/Driver, Impact Driver, Circular Saw and Worklight. Also included is a charger, 2 batteries and a contractor bag.
FEATURES:
- (1) DCD791B - 20V MAX XR Brushless Compact 1/2 in. Drill/Driver
- Has a DEWALT built brushless motor which delivers up to 57% more run time
- 3-mode LED lights with a spotlight mode
- (1) DCF887B - 20-Volt MAX XR brushless compact 1/4 in. impact driver
- Has a DEWALT built brushless motor for longer run time
- 3-speed settings for versatility with Precision Drive for added control
- (1) DCS570B - 20V MAX XR brushless 7-1/4 in. circular saw
- Uses a 7-1/4" blade to provide 2-9/16" cutting capacity at 90 degrees
- Runtime to complete 330 corsscuts in 2x4 (pine)
- (1) DCL040 - 20V MAX LED work light
- Bright flashlight to illuminate your work are with LED output of 110 lumens
- (2) DCB203 - 20V MAX Compact Lithium Ion 2.0Ah Battery Pack
- (1) DCB112 - 12-Volt/20-Volt MAX Lithium Ion Battery Charger
- (1) Contractor bag included
The DCK594P2 20V MAX* XR Lithium Ion 5 Tool Combo Kit features our DCD996 Premium Hammerdrill/Driver with 3-speed transmission and our DEWALT-built high power, high efficiency brushless motor delivering up to 75% more runtime vs. 18v NiCad brushed motors. The DCF887 20V MAX* XR Brushless 1/4" 3-Speed Impact Driver is compact for fitting in tight spaces. Three LED lights make it ideal for working in the dark. The DCS570 20V MAX* XR Circular Saw, features a brushless motor which provides 5200 RPM maintaining speed under load. The DCS367 20V MAX* XR Compact Reciprocating Saw features a compact and lightweight design to help make your jobs easier. The DCL040 is a bright flashlight to illuminate your work area with LED output of 110 lumens.
FEATURES:
- DCD996 has a DEWALT-built high power, high efficiency brushless motor that delivers up to 75% more runtime vs. 18V NiCad brushed motors.
- DCD996 has a heavy-duty 1/2" ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength
- DCF887 has a DEWALT built brushless motor for longer run time
- DCF887 HAS 3-speed settings for versatility with Precision Drive for added control
- DCS570 uses a 7-1/4" blade to provide 2-9/16" Cutting Capacity at 90 degrees
- DCS570 has runtime to complete 330 crosscuts in 2x4 (pine)
- DCS367 has a variable speed trigger with 0-2900 SPM
- DCL040 is a bright flashlight to illuminate your work area with LED output of 110 lumens.
INCLUDES:
- (1) DCD996B 20V MAX Cordless Brushless XR 3-Speed Hammerdrill/Driver
- (1) DCF887B 20V MAX SR 1/4" 3-Speed Impact Driver
- (1) DCS570B 20V MAX 7-1/4" Cordless Circular Saw
- (1) DCL040 20V MAX LED Work Light
- (1) DCS367B 20V MAX XR Brushless Compact Reciprocating Saw
- (2) DCB205 20V MAX XR 5.0Ah Lithium Ion Battery Pack
- (1) DCB115 12V MAX - 20V MAX Lithium Ion Battery Charger
- (1) Contractor Bag
The DCK694P2 20V MAX XR 6-Tool Combo Kit features our DCD996 Premium Hammerdrill/Driver with 3-speed transmission and our DEWALT-built high power, high efficiency brushless motor delivering up to 75% more runtime vs. 18v NiCad brushed motors. The DCF887 20V MAX* XR Brushless 1/4" 3-Speed Impact Driver is compact for fitting in tight spaces. Three LED lights make it ideal for working in the dark. The DCS570 20V MAX* XR® Circular Saw features a brushless motor which provides 5200 RPM maintaining speed under load. The DCS367 20V MAX XR compact Reciprocating saw features a compact and lightweight design to make your jobs easier. The DCS355 20V MAX* XR® Oscillating Multi-Tool has a powerful brushless motor providing up to 75% more run time over a similar brushed tool. The DCL040 is a bright flashlight that illuminates your work area with LED output of 110 lumens.
FEATURES
- DCD996 has a DEWALT-built high power, high efficiency brushless motor that delivers up to 75% more runtime vs. 18v NiCad brushed motors.
- DCD996 has a heavy-duty 1/2" ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength
- DCF887 has a DEWALT built brushless motor for longer run time
- DCS570 uses a 7-1/4" Blade to provide 2-9/16" Cutting Capacity at 90 degrees
- DCS570 has runtime to complete 330 crosscuts in 2x4 (pine)
- DCS367 has a Variable speed trigger with 0-2900 SPM
- DCS355 has a Quick-Change accessory system that allows blades and attachments to be changed quickly without wrenches
- DCL040 is a bright flashlight to illuminate your work area with LED output of 110 lumens.
SPECIFICATIONS
- Number Of Tools 6 Power Tool Type Cordless Product Type Included
- Drill
- Impact Driver
- Circular Saw
- Reciprocating Saw
- Oscillating Tool
- Worklight System 20v Max
THIS KIT INCLUDES
DCD996B, DCF887B, DCS570B, DCL040, DCS355B, DCB205, DCB115
INCLUDES
- (1) DCD996
- (1) DCF887
- (1) DCS570
- (1) DCL040
- (1) DCS355
- (1) DCS367
- (2) DCB205
- (1) DCB115
- (1) Contractor Bag
PRE-ORDER, CURRENT ETA IS AUGUST 2021
This 20V MAX* Lithium Ion 6-Tool Combo Kit features our DCD996 XR Brushless Hammer Drill/Driver with a 3-speed transmission and our high-powered, brushless motor. The DCF887 20V MAX* XR Brushless 1/4 in. 3-Speed Impact Driver is compact for fitting in tight spaces and increasing productivity. The DCS570 20V MAX* XR Brushless Circular Saw features a brushless motor which provides 5200 rpm, maintaining speed under load. The DCS367 20V MAX* XR Brushless Compact Reciprocating Saw features a compact and lightweight design to make your jobs easier. The DCG413 20V MAX* XR Brushless 4-1/2 in. - 5 in. Grinder increases productivity with features like the Quick-Change™ wheel release, a convenient trigger switch with a lock-off button. The DCL040 LED Flashlight helps illuminate your work area with an output of 110 lumens.
FEATURES
- DCD996 has a brushless motor for longer runtime and efficinecy
- DCF887 has a brushless motor for longer runtime and efficiency
- DCS570 uses a 7-1/4 in. blade to provide 2-9/16 in. cutting capacity at 90 degrees
- DCF887 has 3 speed settings for versatility with Precision Drive for added control
- DCD996 has a heavy-duty 1/2 in. ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength
- DCS367 has a variable-speed trigger with 0-2900 SPM
- DCG413 has an 8,000 rpm motor that provides high power for cutting and grinding applications
INCLUDES
- DCD996 - 20V MAX* Hammer Drill/Driver
- DCF887 - 20V MAX* Impact Driver
- DCS570 - 20V MAX* Circular Saw
- DCL040 - 20V MAX* LED
- DCG413 - 20V MAX* Grinder
- DCS367 - 20V MAX* Reciprocating Saw
- DCB115 Charger
- Tool Bag
- 1