Cordless Tools

The 1800 Watt Portable Power Station and Parallel Battery Charger allows for AC power in remote locations for convenient portable power. Able to run most corded tools, it provides 1800 Watts (15 amps) continuous power and 3600 Watts peak power. The DCB1800B runs on four DEWALT 20V MAX batteries (including FLEXVOLT), and for high power applications, four 20V MAX 3.0Ah DEWALT Batteries (DCB200) or higher amp hour are recommended to provide the best results. Not only can the 1800 Watt Portable Power Station power a corded tool remotely, but it also becomes a multi-port parallel charger for up to four DEWALT 20V MAX Batteries (including FLEXVOLT) when plugged into a wall outlet via extension cord (batteries and extension cord sold separately). Compact and lightweight, the 1800 Watt Portable Power Station weighs just 18lbs (without batteries) and is easily portable. Without the need for gas to run, there are no fumes or carbon monoxide emitted from the device. In addition, the 1800 Watt Portable Power Station can be used to provide temporary power in areas where noise is restricted such as a jobsite with strict regulations. With an integrated temperature-controlled cooling fan and heavy-duty roll cage, the Portable Power Station is a durable and convenient power solution for a variety of uses.

FEATURES

• 1800 Watt Portable Power Station
• 4 Port Parallel Charger
• Four 20V MAX batteries in (including FLEXVOLT), 15 amps out
• Batteries and extension cord sold seperately
• Runs most variable speed power tools

SPECIFICATIONS

• 120V Receptacles 1
• Charging connection: Male 120V plug
• Batteries compatible: 20V MAX
• Charging time: 2 Hours, 4.0 Ah battery
• Height: 10.75 IN
• Length: 12.75 IN
• Width: 21.30 IN
• Shipping weight: 22 lbs
• Weight without batteries: 18 lbs
• Required number of batteries: 4
• Rated current (120V/240V): 15 amps
• Max curent (120V/240V): 30 amps
• Rated AC output: 1800 Watts
• MAX AC output: 3600 Watts
• Temperature range: 32-104 degrees F (0-40 degrees C)
• Batteries compatible: 20V MAX
• Charging rate: 2.0 amps
• Compatible with: 20V MAX batteries
• Indicator lights: Inverter and charger, operation and fault, low battery
• Quantity of batteries charged: 4
• Sequential or simultaneous charging: Simultaneous
• Sinewave type: Modified

The DEWALT® 60V MAX* Mixer/Drill with E-Clutch® System has over 2x the power of our corded mixer allowing it to easily mix thinset, tile mortar, and fiber reinforced concrete†. In addition to mixing, the powerful brushless motor allows the DCD130 to tackle demanding drilling applications. In order to improve control the Mixer/Drill has anti-rotation E-Clutch® System, which offers technology capable of detecting the motion of the tool. This feature senses the motion of the tool and shuts it down if necessary. The red indicator LED illuminates when the E-Clutch® System is engaged.

FEATURES

• Mix up to 19 premixed drywall buckets (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah).**
• Mix up to 17 buckets of tile mortar (5 gal) on a single charge using DCB606 Flexvolt battery (6Ah).**
• Mix up to 9 buckets of concrete (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah).**
• Integrated E-Clutch® System helps to improve user control.
• 3-Position side handle allows for optimum position while mixing.
• Continuous variable speed trigger allows the correct speed to be found.

SPECIFICATIONS

• CHUCK SIZE 1/2"
• NO LOAD SPEED 0-600 RPM
• SYSTEM 60V MAX*
• TOOL WEIGHT 6.94 LBS

INCLUDES

• DCD130 Mixer/Drill
• Side Handle
• Chuck Key Holder and Chuck Key

The DEWALT 60V MAX* Mixer/Drill with E-Clutch System has over 2x the power of our corded mixer allowing it to easily mix thinset, tile mortar, and fiber reinforced concrete†. In addition to mixing, the powerful brushless motor allows the DCD130 to tackle demanding drilling applications. In order to improve control the Mixer/Drill has anti-rotation E-Clutch System, which offers technology capable of detecting the motion of the tool. This feature senses the motion of the tool and shuts it down if necessary. The red indicator LED illuminates when the E-Clutch® System is engaged.

FEATURES

• Mix up to 19 premixed drywall buckets (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah).**
• Mix up to 17 buckets of tile mortar (5 gal) on a single charge using DCB606 Flexvolt battery (6Ah).**
• Mix up to 9 buckets of concrete (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah).**
• Integrated E-Clutch® System helps to improve user control.
• 3-Position side handle allows for optimum position while mixing.
• Continuous variable speed trigger allows the correct speed to be found.

SPECIFICATIONS

• CHUCK SIZE 1/2"
• NO LOAD SPEED 0-600 RPM
• SYSTEM 60V MAX
• TOOL WEIGHT 6.94 LBS

INCLUDES

• DCD130 Mixer/Drill
• DCB606 (1) 6AH Battery
• DCB118
• Side Handle
• Chuck Key Holder and Chuck Key

The FLEXVOLT Advantage 20V MAX VSR Stud and Joist Drill with E-Clutch System features a 1/2 in. chuck and brushless motor that provides corded power in a cordless solution. Ideal for plumbers, electricians, and HVAC installers who need to drill large diameter holes in wood. This drill provides exceptional power, control, durability, and runtime with its 20V brushless motor, E-Clutch System, mechanical clutch, and variable-speed switch. Equipped with the innovative bind-up control feature called E-Clutch System this drill increases user control in bind-up/stall situations by sensing a stall during use and managing torque accordingly.

Features:

• At +1500 MWO it provides ample power to complete challenging applications in compact form
• Power of a cord with cordless freedom
• Top grip handle and leverage and control
• Variable speed switch
• E-Clutch is a Perform and Protect; feature that detects reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained.
• Metal-gear housing for jobsite durability and increased reliability
• The DEWALT; Anit-Rotation E-CLUTCH system, offers technology capable of sensing the motion of the tool and shuts it down if necessary in a bind up.

Includes:

• DCD444 Drill
• Chuck Key and Holder

The FLEXVOLT Advantage 20V MAX VSR Stud and Joist Drill with E-Clutch System features a 1/2 in. chuck and brushless motor that provides corded power in a cordless solution. Ideal for plumbers, electricians, and HVAC installers who need to drill large diameter holes in wood. This drill provides exceptional power, control, durability, and runtime with its 20V brushless motor, E-Clutch System, mechanical clutch, and variable-speed switch. Equipped with the innovative bind-up control feature called E-Clutch System this drill increases user control in bind-up/stall situations by sensing a stall during use and managing torque accordingly.

Features:

• At +1500 MWO it provides ample power to complete challenging applications in compact form
• 7/16 Quick Change Chuck
• Power of a cord with cordless freedom
• Top grip handle and leverage and control
• Variable speed switch
• E-Clutch is a Perform and Protect; feature that detects reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained.
• Metal-gear housing for jobsite durability and increased reliability
• The DEWALT; Anit-Rotation E-CLUTCH system, offers technology capable of sensing the motion of the tool and shuts it down if necessary in a bind up.

Includes:

• DCD445 Drill
• Chuck Key and Holder

The FLEXVOLT 60V MAX VSR Stud and Joist Drill with E-Clutch System features a 1/2 in. chuck and brushless motor that provides corded power in a cordless solution. Ideal for plumbers, electricians, and HVAC installers who need to drill large diameter holes in wood. This drill provides exceptional power, control, durability, and runtime with its 60V brushless motor, E-Clutch System, mechanical clutch, and two variable-speed ranges. Equipped with the innovative bind-up control feature called E-Clutch System this drill increases user control in bind-up/stall situations by sensing a stall during use and managing torque accordingly.

Features:

• 60V MAX Brushless Motor for increase power and runtime
• Power of a cord with cordless freedom
• Adjustable bail handle and 2-position side handle for leverage and control
• 2 variable speed ranges (0-300 / 0-1250 rpm) to match appropriate speed to the application
• E-Clutch is a Perform and Protect; feature that detects reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained.
• Metal-gear housing for jobsite durability and increased reliability
• The DEWALT; Perform and Protect; line of power tools is designed to provide a high level of one or more of the following: control, dust containment, or low vibration, without sacrificing performance.

Includes:

• DCD460 Drill
• Chuck Key and Holder
• 2-Position Side Handle
• Adjustable Bail Handle

Specifications:

The FLEXVOLT 60V MAX VSR Stud and Joist Drill with E-Clutch System features a 1/2 in. chuck and brushless motor that provides corded power in a cordless solution. Ideal for plumbers, electricians, and HVAC installers who need to drill large diameter holes in wood. This drill provides exceptional power, control, durability, and runtime with its 60V brushless motor, E-Clutch System, mechanical clutch, and two variable-speed ranges. Equipped with the innovative bind-up control feature called E-Clutch System this drill increases user control in bind-up/stall situations by sensing a stall during use and managing torque accordingly.

Features:

• 60V MAX Brushless Motor for increase power and runtime
• Power of a cord with cordless freedom
• Adjustable bail handle and 2-position side handle for leverage and control
• 2 variable speed ranges (0-300 / 0-1250 rpm) to match appropriate speed to the application
• E-Clutch is a Perform and Protect; feature that detects reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained.
• Metal-gear housing for jobsite durability and increased reliability
• The DEWALT; Perform and Protect; line of power tools is designed to provide a high level of one or more of the following: control, dust containment, or low vibration, without sacrificing performance.

Includes:

• DCD460 Drill
• (1) DCB606 FLEXVOLT 20V/60V MAX Lithium Ion 6.0Ah Battery
• Fast Charger
• Chuck Key and Holder
• 2-Position Side Handle
• Adjustable Bail Handle
• Kit Bag

Specifications:

The FLEXVOLT 60V MAX VSR Stud and Joist Drill with E-Clutch System features a 1/2 in. chuck and brushless motor that provides corded power in a cordless solution. Ideal for plumbers, electricians, and HVAC installers who need to drill large diameter holes in wood. This drill provides exceptional power, control, durability, and runtime with its 60V brushless motor, E-Clutch System, mechanical clutch, and two variable-speed ranges. Equipped with the innovative bind-up control feature called E-Clutch System this drill increases user control in bind-up/stall situations by sensing a stall during use and managing torque accordingly.

Features:

• 60V MAX Brushless Motor for increase power and runtime
• Power of a cord with cordless freedom
• Adjustable bail handle and 2-position side handle for leverage and control
• 2 variable speed ranges (0-300 / 0-1250 rpm) to match appropriate speed to the application
• E-Clutch is a Perform and Protect; feature that detects reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained.
• Metal-gear housing for jobsite durability and increased reliability
• The DEWALT; Perform and Protect; line of power tools is designed to provide a high level of one or more of the following: control, dust containment, or low vibration, without sacrificing performance.

Includes:

• DCD460 Drill
• (2) DCB606 FLEXVOLT 20V/60V MAX Lithium Ion 6.0Ah Battery
• Fast Charger
• Chuck Key and Holder
• 2-Position Side Handle
• Adjustable Bail Handle
• Kit Bag

Specifications:

FEATURES

• Anti-rotation E-CLUTCH System detects the motion of the tool. This feature senses the motion of the tool and shuts it down if necessary. The red indicator LED illuminates when the E-CLUTCH System is engaged.
• 2 variable-speed ranges (0-400/ 0-1320 rpm) to match appropriate speed to the application
• Magnesium gear case to reduce weight while maintaining jobsite durability.
• Power of the cord with cordless freedom
• 60V MAX* brushless motor for increased power and runtime
• Tool Connect Tag Ready. Installing a DEWALT Tool Tag allows for tracking and locating of the drill using the DEWALT Tool Connect.
• Easily shift between 1st and 2nd speed without having to feather the trigger

APPLICATIONS

• Up to 4-5/8 in. self-feed bits into wood
• Up to 6-1/4 in. Hole Saws into wood
• Dry core drilling up to 6 in.

FEATURES

• Anti-rotation E-CLUTCH System detects the motion of the tool. This feature senses the motion of the tool and shuts it down if necessary. The red indicator LED illuminates when the E-CLUTCH System is engaged.
• 2 variable-speed ranges (0-400/ 0-1320 rpm) to match appropriate speed to the application
• Magnesium gear case to reduce weight while maintaining jobsite durability.
• Power of the cord with cordless freedom
• 60V MAX* brushless motor for increased power and runtime
• Tool Connect Tag Ready. Installing a DEWALT Tool Tag allows for tracking and locating of the drill using the DEWALT Tool Connect.
• Easily shift between 1st and 2nd speed without having to feather the trigger

Includes:

• DCD470 (Tool)
• DCB609 (9.0Ah Battery)
• Contractor Bag
• DCB118 (Fast Charger)

APPLICATIONS

• Up to 4-5/8 in. self-feed bits into wood
• Up to 6-1/4 in. Hole Saws into wood
• Dry core drilling up to 6 in.

The DCD701 XTREME 12V MAX Brushless 3/8-in Cordless Drill/Driver Kit is compact and performance packed. This drill is ideal for precision applications like drilling small pilot holes. It can also can accept up to a ½-in spade bit. At only 5.97-in long, it is packed to perform with a 2-speed transmission. It also features a bright LED positioned light on the foot to illuminate work areas.

• DCD701 12V MAX Brushless 3/8-in Drill/Driver has 32% more power (when using DCB122 2 Ah battery vs DCD410 drill/driver using 1.3 Ah battery)
• Brushless motor for efficient performance and runtime
• 3/8-in ratcheting chuck for a wide variety of bits
• 2-Speed transmission and 15 clutch settings for a variety of applications
• LED foot light for superior visibility
• Lightweight at 1.9 lbs (Tool Only)
• Belt clip conventiently allows user to carry tool while not in use

Includes:

DCD701B 12V MAX Brushless 3/8-in drill/driver, and belt clip

The DCD701 XTREME 12V MAX Brushless 3/8-in Cordless Drill/Driver Kit is compact and performance packed. This drill is ideal for precision applications like drilling small pilot holes. It can also can accept up to a ½-in spade bit. At only 5.97-in long, it is packed to perform with a 2-speed transmission. It also features a bright LED positioned light on the foot to illuminate work areas.

• DCD701 12V MAX Brushless 3/8-in Drill/Driver has 32% more power (when using DCB122 2 Ah battery vs DCD410 drill/driver using 1.3 Ah battery)
• Brushless motor for efficient performance and runtime
• 3/8-in ratcheting chuck for a wide variety of bits
• 2-Speed transmission and 15 clutch settings for a variety of applications
• LED foot light for superior visibility
• Lightweight at 1.9 lbs (Tool Only)
• Kitted with 2.0 Ah batteries with state of charge indicator
• Belt clip conventiently allows user to carry tool while not in use

Includes:

DCD701B 12V MAX Brushless 3/8-in drill/driver, two DCB122 12V MAX batteries with state of charge indicator, DCB112 12V and 20V MAX charger, belt clip and tool bag

This cordless kit includes one 3/8 in. hammer drill/driver, two 12V MAX* 2Ah batteries, charger, and tool bag. The DCD706 XTREME 12V MAX* brushless 3/8 in. cordless hammer drill/driver is compact and performance packed. It designed for precision and great for a variety of drilling applications. This cordless hammer drill is only 6.6 in long with 250 UWO and a 25,500 BPM to get a majority of applications done. It also features a bright LED positioned on the foot to illuminate all work areas.

Features:

• DEWALT built brushless motor for efficient performance and runtime
• 3/8 in. ratcheting chuck for a wide variety of bits
• 2-Speed transmission and 15 clutch settings for a variety of applications
• LED foot light for superior visibility
• Lightweight at only 2.3lbs (Tool Only)
• Compact at only 6.6 in. front to back

Includes:

• DCD706B - 12V MAX* Brushless 3/8 in. Hammer Drill
• Belt Clip

Only 6.3 in. front to back, this Compact Brushless Drill/Driver features a high performance brushless motor that delivers 340 unit watts outs (UWO). Its LED provides optimum illumination in dark spaces. And, its ergonomic design offers increased comfort, balance, and easier tool control. It also has a removable belt hook. This tool is backed by our 3-year, limited warranty so you can buy with confidence. Battery and charger sold separately.

Features:

• Compact at only 6.3 in. front to back designed to fit in tight spaces
• Lightweight at only 2.4 lbs.
• LED foot light for superior visibility
• Variable speed trigger allows for control and precision on delicate work surfaces
• DEWALT built brushless motor for efficient performance and runtime
• 1/2 in. ratcheting chuck provides superior bit girpping strength
• 340 UWO of power to help get the job done

Includes:

• (1) DCD708 20V MAX Brushless Compact 1/2 in. Drill/Driver
• (1) Belt Clip

DEWALT DCD709B ATOMIC 20-Volt MAX Lithium-Ion 1/2 in. Brushless Compact Hammer Drill/Driver (Tool Only) features a high-performance brushless motor that delivers 340 unit watts outs (UWO) and LED foot light to provide optimum illumination in dark spaces as you work. The DCD709 features an ergonomic design for balance and easier tool control along with a removable belt hook.

FEATURES

• DEWALT built brushless motor for efficient performance and runtime
• Compact at only 6.87-inch front to back designed to fit in tight spaces
• Lightweight at only 2.7 lbs.
• LED foot light for superior visibility
• 1/2-inch ratcheting chuck provides superior bit gripping strength
• Battery & Charger Sold Separately

The DeWALT DCD740 is a compact and light weight tool with a 10mm 3/8″ ratcheting chuck with a deep hex pocket to allow a 2″ power bit to be fully inserted giving it a head width of about 125mm, not including the recessed notch that gives you that little bit more. It has 2 speed settings for increased flexibility combined with DeWALT durability. The main feature of this tool is it’s ability to get into awkward spaces that not many other tools will reach. These are powered by all DeWALT slide type XR 18 Volt & 20V Max, 1.5, 2.0, 3.0 and 4.0Ah slide batteries. All this adds up to make a fantastic little tool.

FEATURES:

• Dual speed ranges (0-650/0-2000) rpm for increased flexibility providing a wider range of applications.
• Compact front to back length (4.0″) allowing users to fit into really hard to reach spaces.
• Multi grip trigger provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger.
• 10mm (3/8″) Ratcheting Chuck with Deep Hex Pocket allows 2″ (50mm) hex bit to be fully inserted for getting into tight spaces.
• Powered by all DeWALT 18 Volt & 20 V Max Slide Type batteries: 1.5, 2.0, 3.0 & 4.0Ah.

SPECIFICATIONS:

• Voltage: 18 Volt / 20V Max**
• Max Power: 360UWO
• Chuck Size: 10mm (3/8″)
• # of Speed Settings: 2
• Rpm: 0-650/0-2,000
• Chuck Type: Ratcheting Plastic Sleeve.
• Tool Weight: 1.37 Kg.
• Tool Length: 300mm.
• Head width chuck fully closed: Approx 115mm.
• Head width with to Phillips tip end with 2″ power bit in hex pocket: Approx 125mm.
• ** Note: 20V Max is a DeWALT “Brand Name” for the XR Series of tools, 20V Max batteries and tools are in in fact 18 Volt batteries and tools. Under load batteries output 18 volts, but at idle most 18 Volt batteries output 20 volts, Hence the name “20V Max”. 20V Max batteries are in fact 18 Volt batteries. Any 20V Max tool is simply an 18 Volt tool with the brand name 20V Max.

FEATURES

• DEWALT-built high power, high efficiency brushless motor delivers up to 57% more run time over brushed
• XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs
• Heavy-duty 1/2" ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength
• 3-Mode LED provides lighting in dark or confined spaces up to 20X brighter than previous model
• LED Spotlight Mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces
• 3-speed, all-metal high performance transmission optimizes tool-to-task for fast application speeds and improved run-time
• 0-38,250 BPM for fast drilling in masonry materials

SPECIFICATIONS

• AMP HOUR 5.0 AH 
• BATTERY TYPE LI-ION
• CHUCK SIZE 1/2" 
• CHUCK TYPE METAL RATCHETING
• CLUTCH SETTINGS 11 
• KIT BOX YES
• MAX POWER 820 UWO 
• # OF SPEED SETTINGS 3.0
• POWER TOOL TYPE CORDLESS 
• SYSTEM 20V MAX*
• VARIABLE-SPEED TRIGGER YES

INCLUDES

• DCD996 - 20V MAX* XR Lithium Ion Brushless Premium 3-Speed Hammerdrill
• Belt Hook
• 360° side handle

FEATURES

• DEWALT-built high power, high efficiency brushless motor delivers up to 57% more run time over brushed
• XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs
• Heavy-duty 1/2" ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength
• 3-Mode LED provides lighting in dark or confined spaces up to 20X brighter than previous model
• LED Spotlight Mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces
• 3-speed, all-metal high performance transmission optimizes tool-to-task for fast application speeds and improved run-time
• 0-38,250 BPM for fast drilling in masonry materials

SPECIFICATIONS

• AMP HOUR 5.0 AH 
• BATTERY TYPE LI-ION
• CHUCK SIZE 1/2" 
• CHUCK TYPE METAL RATCHETING
• CLUTCH SETTINGS 11 
• KIT BOX YES
• MAX POWER 820 UWO 
• # OF SPEED SETTINGS 3.0
• POWER TOOL TYPE CORDLESS 
• SYSTEM 20V MAX*
• VARIABLE-SPEED TRIGGER YES

INCLUDES

• DCD996 - 20V MAX* XR Lithium Ion Brushless Premium 3-Speed Hammerdrill
• (2) DCB205 - 20V MAX* XR High Capacity Li-Ion Batteries (5.0Ah)
• Charger
• Belt Hook
• 360° side handle
• Kitbox

The DEWALT 20-Volt Max Lithium-Ion Cordless Blower (DCE100B) is ideal for clearing debris from the ground or overhead and also works well for blowing out equipment. A 3-speed design offers versatility for a range of jobs, while its compact profile makes it perfect for use in tight spots. This blower is part of the versatile 20-Volt Max battery system and is sold on its own, so you can add it to your collection and use with your existing DEWALT battery and charger.

• 3-speed selector switch provides versatility when clearing debris
• Variable speed trigger enables adjustment of blowing power in use
• Trigger lock-on reduces user fatigue
• Lightweight, compact design allows for use in space-restricted areas
• Part of DEWALT's 20-Volt Max system and includes tool only
• Battery and charger sold separately

Expand PEX Type-A tubing from 3/8 in. to 1 in. with the 20V MAX* Cordless 1 in. PEX Expander, the fastest PEX Expander on the market.** It’s proudly made in the USA with global materials. An automatic rotating head helps to ensure even expansion. The bright onboard LED work light and full trigger actuation make it an excellent tool in dimly lit, tight spaces. Carry this tool conveniently around the jobsite with a dual-sided hang hook and belt hook. Rubber overmold on the handle provides an ergonomic grip to keep you comfortable all day. This tool uses DEWALT PEX Heads, and it is compatible with leading competitive PEX heads.

FEATURES

• Expands 3/8 in. - 1 in. Pex Type-A tubing
• Automatic rotating head action for even expansion
• Full trigger actuation for use in tight spaces
• Bright LED work light to help illuminate dark areas
• Dual-sided hang and belt hooks for convenient storage
• Rubber overmold for comfortable, ergonomic grip
• Uses DEWALT PEX Heads. Compatible with Milwaukee and Uponor Heads.

SPECIFICATIONS

INCLUDES

• DCE400 PEX Expander
• (2) DCB203 Batteries
• Charger
• (3) Expander Heads (1/2 in., 3/4 in., 1 in.)
• PEX Expander Grease
• Kit Box