Cordless Nailers

The DEWALT Cordless Fencing Stapler, designed for rural applications is 100% battery operated, eliminating the need for fuel cells and the hassle of a hose and compressor. Variable power settings, tool-free depth of drive and jam clearing give the user confidence to get the job done quickly and efficiently. The ergonomic design, versatility, and convenience makes the DCFS950 a tool for agricultural fencing and utility applications. Compatible with all DEWALT 9 GA Fencing Staples available in three common sizes, 1-1/2", 1-3/4", 2" (sold separately).

Features

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Rapid Cycle or Sequential firing modes for optimized control
• Tool-free selectable trigger for sequential or Rapid Cycle actuation modes
• Adjustable belt hook for left or right attachment depending on user preference
• Variable power settings delivers a wide range of power for multiple staples lengths in various applications
• Tool-free depth adjustment for precise staple depth
• Low staple lockout prevents dry firing and damage to wire
• Multi-angle contact trip allows for fast accurate staple placement
• Compatible with DEWALT DFS9150B1G, DFS9175B1G, and DFS9200B1G 9 GA galvanized fencing staples (sold separately)
• Compatible with DEWALT 20V MAX* batteries

Features

• 100% Battery Powered. Eliminates the Hassle of Using Gas, Compressor, and Hose
• Tool-Free Depth Adjustment for Driving Recessed Fasteners
• Stall Release Lever to Reset Driver Blade in the Event of a Jam
• Low Nail Lockout with Bypass and Reload Alert
• Carbide Nose Inserts for Durability
• Steel Skid Plates with Rubber Inserts Protect the Tool and Help to Stop it from Sliding
• Dual Load Magazine / Integrated Nail Tray

Specifications

• Drives ¾” to 1-3/4” Roofing Nails
• Magazine Capacity -120
• Compatible with all DEWALT 20V MAX* Batteries

Ergonomics

• 12” from Front to Back
• 8 LBS Tool Weight

Complete finish, trim, and remodeling work with this ATOMIC Compact Series 20V MAX Brushless Cordless 23 Ga. Pin Nailer. The battery-powered nailer is designed to drive 23 Ga. pin nails measuring between 5/8 in. and 1-1/2 in. with its high-output brushless motor. Take advantage of cordless convenience as you seamlessly drive nails with no hoses, compressors, or gas cartridges required. Battery and charger not included.

Features

• Compatible with several sizes of fasteners: unit works with 23 ga. Pin nails from 5/8 up to 1-1/2 in. In length
• Designed for ease of use with tool-free jam release and tool-free depth adjust
• Know when to reload: low nail lockout system with led indicator to inform user when it’s time to reload
• Shots per charge: dcn623b drives 2,000 nails on average per charge

Includes

• (1) DCN623 DEWALT 20V MAX 23 Ga. Cordless Pin Nailer

FEATURES:

• Brushless Motor: Maximizes Runtime & Durability
• Magazine Orientation: Straight magazine – fastener length 1-1/4” and 2-1/2” 16ga
• Multi-functional LED’s: Workspace illumination, low battery and stall indicators
• Dual Operating Modes: Sequential for precision and Bump for faster operation
• Micro Nose: Improves Line of Sight & Accuracy of Nail Placement (Compared to DC616 & DCN660)
• Tool-Free Jam Release: To quickly and easily clear nail jams
• Tool-Free Stall Release: To quickly and easily clear nail jams
• Narrow Nose: Designed for clear line of sights and accuracy
• Tool-Free Depth Adjustment: For precise countersinking of nails
• Tool-Free Selector Switch: For sequential or Contact actuation modes
• Multifunctional LED Lights: Help to provide both workspace illumination and tool diagnostics
• Adjustable Belt Hook: For left or right attachment

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

FEATURES

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Brushless motor maximizes runtime and durability
• Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
• Tool-free depth adjustment for precise countersinking of nails
• Tool-free jam release to quickly and easily clear nail jams
• Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
• Tool-free selectable trigger for sequential or contact actuation modes
• Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
• Adjustable belt hook for left or right attachment depending on user preference
• Low nail lockout prevents dry firing and unwanted marks on the work material
• Compatible with all DEWALT 20V MAX* batteries

SPECIFICATIONS

• BELT / RAFTER HOOK: YES
• DEPTH ADJUSTMENT TOOL: FREE
• FASTENER LENGTH: 5/8 TO 2-1/8 IN
• FASTENER TYPE / GAUGE: 18 GAUGE BRAD NAILS
• FIRING / ACUTATION MODE: TOOL FREE SELECTABLE TRIGGER
• JAM CLEARANCE TOOL: FREE
• POWER TOOL TYPE: CORDLESS
• SYSTEM: 20V MAX
• TOOL HEIGHT: 11.8 IN
• TOOL LENGTH: 10.3 IN
• TOOL WEIGHT: 5.3 LBS
• TOOL WIDTH: 3.7 IN

INCLUDES

• DCN680 - Brad Nailer

The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN681 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.͍

FEATURES

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Brushless motor maximizes runtime and durability
• Tool-free selectable trigger for sequential or contact actuation modes
• Tool-free depth adjustment for precise countersinking of staples
• Low nail lockout prevents dry firing and unwanted marks on the work material
• Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
• Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
• Adjustable belt hook for left or right attachment depending on user preference
• Bottom Load magazine for easy loading and removal of jammed fasteners
• Compatible with all DEWALT 20V MAX* batteries

SPECIFICATIONS

• Belt / Rafter Hook: Yes
• Depth Adjustment Tool Free
• Fastener Length: 1/2 To 1-1/2
• Fastener Type: Gauge: 18ga ¼” Narrow Crown Staples
• Firing / Acutation Mode Tool Free Selectable Trigger
• Jam Clearance Tool Free
• Power Tool Type: Cordless
• System: 20v Max
• Tool Height: 11.4
• Tool Length: 10.1
• Tool Weight: 5.7

The DEWALT 20V MAX Cordless Cable Stapler is built for residential wiring applications, primarily fastening Romex brand wires and cables. Made in the USA with global materials, this stapler has a proprietary cable guide that helps to drive staples over cable. The compact frame and lightweight design are ideal for tight spaces. A center-mounted LED light helps to eliminate shadows and illuminate the work area in low light conditions. Compatible with DEWALT DRS18100 1" insulated cable staples (sold separately). *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

FEATURES

• Proprietary cable guide to line up shots
• Center-mounted LED for workplace illumination
• Extended trigger provides easy use in multiple orientations
• Adjustable belt hook for left or right attachment depending on user preference
• Made in the USA with global materials
• Compatible with DEWALT DRS18100 1" Insulated Cable Staples (sold separately)
• Compatible with all DEWALT 20V MAX* batteries

SPECIFICATIONS

• TOOL HEIGHT 12 IN
• TOOL LENGTH 7.75 IN
• TOOL WEIGHT 4.7 LBS
• TOOL WIDTH 3 IN

INCLUDES

• Manual
• Belt Clip

NOTE: DCN8906 2-1/4 MAGAZINE ATTACHMENT IS AVAILABLE!

The 20V MAX XR 1in Magazine Cordless Concrete Nailer is built for drywall track installation into concrete and steel substrates. This fully electric nailer operates on the same battery as other DeWalt 20V MAX tools and eliminates the need to purchase fuel cells. A field-serviceable driver blade minimizes downtime. Variable power settings, small-profile 1in capacity magazine, and interchangeable nose pieces maximize versatility and convenience. LED work lights make this nailer shine in lowlight conditions. Compatible with DeWalt Cordless Concrete Nailer fasteners in lengths 1/2in – 1in. Kit includes standard/drywall nose piece and kit box. Compatible with DeWalt Cordless Concrete Nailer fasteners in lengths 1-1/4 – 2-1/4in when used with DCN8906 2” Accessory Magazine.

Features

• Combustion-free operation drives fasteners without need for fuel cells or powder loads
• Drives fasteners into concrete and steel substrates for application versatility
• Field-serviceable driver piston for easy maintenance
• Variable power settings for application versatility
• 1in compact magazine for improved access in tight areas and lighter weight (vs. DCN890)

Includes

• DCN890 20V MAX Cordless Concrete Nailer
• (1) DCN8904 Standard / Drywall Nose Piece
• Kit box

Complete a wide variety of framing jobs with the DEWALT 20V MAX Brushless Cordless 30º Paper Collated Framing Nailer. Designed to help minimize downtime between shots with an innovative flywheel that stays active for 6 seconds after the trigger is released, this lightweight cordless nailer removes the need for hoses and compressors. Install up to 530 sqft of subflooring per charge and complete up to 100 ft. of wall framing per charge with this next-generation tool that delivers powerful performance in a wide range of applications. Battery and charger sold separately.

Features

• CORDLESS CONVENIENCE - Pneumatic framing pros can save up to 20 min. daily in setup and clean-up time by switching from a pneumatic nailer to a DEWALT cordless framing nailer
• LIGHTWEIGHT DESIGN - Lighten your load on tough jobs with this tool that weighs only 8.65 lbs. (tool only)
• INNOVATIVE NOSE DESIGN - Align, grip, and drive nails at aggressive angles with the redesigned nose specifically built for “Toe-Nailing” applications
• HELP MINIMIZE DOWNTIME - Help minimize time between shots with Active Flywheel Technology in rapid sequential mode eliminating ramp-up time between shots
• QUICK SETUP - Show-up and get right to work with this cordless nailer requiring no compressors or hoses
• SIMPLIFY INVENTORY MANAGEMENT - Track and manage this Chip-Ready tool in the TOOL CONNECT system (Chip sold separately)
• NAIL CAPACITY - Take on tough jobs with up to a 3-1/2 in. nail capacity
• ON-SITE SERVICEABILITY - Limit maintenance delays with field serviceable springs and driver blade
• COMPATIBLE WITH EXTENDED MAGAZINE (DZN920) - Hold 2 strips of nails using an optional extended magazine (DZN920) constructed from high-grade magnesium (magazine sold separately)
• HELP MAXIMIZE PRODUCTIVITY - Install up to 530 sqft of subflooring per charge and complete up to 100 ft. of wall framing per charge
• POWERFUL PERFORMANCE - Finish a wide-range of applications with an powerful brushless motor
• UP TO 72% MORE SUB-FLUSH - Drive nails up to 72% more sub-flush than previous generation
• HIGH-STRENGTH MAGNESIUM MAGAZINE - High- strength magnesium magazine for durability

Includes 

• (1) DCN930 Nailer
• (1) Belt Hook and Screw
• (1) No Mar Tip
• (1) Hex Wrench
• (1) Manual

The DRS18100 1" Insulated Cable Staples are designed for use in the DEWALT DCN701 Cordless Cable Stapler. They are UL listed (406A) for common Romex (NM Sheathed Cable), and MC (Metal Clad) cable applications. The staple crown is plastic insulated and these fasteners adhere to the National Electrical Code. These staples can also be driven manually using a hammer for tight space applications. 

Features:

• UL Listed (406A) and compliant with the National Electrical Code
• 1" staple leg length with 3/4" plastic insulated crown
• For use in the DEWALT DCN701 20V MAX Cordless Cable Stapler
• Can be manually driven with a hammer in tight locations
• UL approved for single or double stacked Romex (NM Sheathed Cable) and MC (Metal Clad) cable. See UL approved cable combinations chart for specific cable approvals.
• Also suitable for use with low voltage cables such as CAT3, CAT5, and coax.
• 540 staples per box