Specialty Tools

The 1800 Watt Portable Power Station and Parallel Battery Charger allows for AC power in remote locations for convenient portable power. Able to run most corded tools, it provides 1800 Watts (15 amps) continuous power and 3600 Watts peak power. The DCB1800B runs on four DEWALT 20V MAX batteries (including FLEXVOLT), and for high power applications, four 20V MAX 3.0Ah DEWALT Batteries (DCB200) or higher amp hour are recommended to provide the best results. Not only can the 1800 Watt Portable Power Station power a corded tool remotely, but it also becomes a multi-port parallel charger for up to four DEWALT 20V MAX Batteries (including FLEXVOLT) when plugged into a wall outlet via extension cord (batteries and extension cord sold separately). Compact and lightweight, the 1800 Watt Portable Power Station weighs just 18lbs (without batteries) and is easily portable. Without the need for gas to run, there are no fumes or carbon monoxide emitted from the device. In addition, the 1800 Watt Portable Power Station can be used to provide temporary power in areas where noise is restricted such as a jobsite with strict regulations. With an integrated temperature-controlled cooling fan and heavy-duty roll cage, the Portable Power Station is a durable and convenient power solution for a variety of uses.

FEATURES

• 1800 Watt Portable Power Station
• 4 Port Parallel Charger
• Four 20V MAX batteries in (including FLEXVOLT), 15 amps out
• Batteries and extension cord sold seperately
• Runs most variable speed power tools

SPECIFICATIONS

• 120V Receptacles 1
• Charging connection: Male 120V plug
• Batteries compatible: 20V MAX
• Charging time: 2 Hours, 4.0 Ah battery
• Height: 10.75 IN
• Length: 12.75 IN
• Width: 21.30 IN
• Shipping weight: 22 lbs
• Weight without batteries: 18 lbs
• Required number of batteries: 4
• Rated current (120V/240V): 15 amps
• Max curent (120V/240V): 30 amps
• Rated AC output: 1800 Watts
• MAX AC output: 3600 Watts
• Temperature range: 32-104 degrees F (0-40 degrees C)
• Batteries compatible: 20V MAX
• Charging rate: 2.0 amps
• Compatible with: 20V MAX batteries
• Indicator lights: Inverter and charger, operation and fault, low battery
• Quantity of batteries charged: 4
• Sequential or simultaneous charging: Simultaneous
• Sinewave type: Modified

DESCRIPTION:

Our 20V MAX* Corded/Cordless Air Inflator can run on any one of three power sources** for maximum versatility: 20V MAX* battery, 12V DC, or 110V AC. Use it on the jobsite, or on the go. It features a high-pressure rubber hose for durability. The threaded chuck and included onboard accessories make it easy to inflate items from tires to footballs. Setting desired air pressure is simple with the digital gauge, and the auto-shutoff provides accurate inflation. The high-volume hose allows fast inflation of mattresses and other inflatables with the push of a button. Move the hose to the deflation port for quick and easy take down. An onboard LED light helps to provide illumination in dark spaces. Heavy-duty rubber feet help reduce walking while in use. **Battery, charger, and AC power adapter sold separately.

FEATURES:

• High-pressure inflation mode with automatic shutoff
• High-volume inflation and deflation modes
• LED light helps to provide illumination
• Three power sources** for inflation on a jobsite and on the go (**20V MAX* battery, 12V DC, or 110V AC)
• Convenient onboard accessory storage
• Heavy-duty rubber feet help reduce walking when in use
• Threaded chuck for secure connection to inflation valve

SPECIFICATIONS:

• POWER SUPPLY 20V MAX*, 12V DC, 110V AC** (**AC POWER ADAPTER SOLD SEPARATELY)
• TOOL HEIGHT 9.8 IN
• TOOL LENGTH 5.2 IN
• TOOL WEIGHT 5.5 LBS
• TOOL WIDTH 11.9 IN

INCLUDES:

• DCC020I Air Inflator
• 12V DC Power Cord
• High-Pressure Tapered Nozzle
• Presta Valve Adapter
• Inflator Needle

Keep using the pneumatic tools you already have while enjoying the convenience and portability of cordless with the 20V MAX 2-1/2 Gallon Brushless Cordless Air Compressor. Each battery charge can sink over 850 nails, providing runtime to complete a variety of applications. Its One Turn Regulator means you won’t have to fight with the dial. Plus, it's made right here in the USA with global materials.

 Features

• Do more in less time: drive over 850 nails per charge
• Versatility and power: air delivery of 1.0 SCFM at 90 psi
• Fast and accurate pressure adjustments with OneTurn regulator
• Protect critical components with heavy-duty roll cage design
• The convenience of cordless: brushless motor with a heavy-duty oil-free pump
• Lightweight and portable: weighs only 21-1/2 lbs.
• Quiet operation: 80 dba operational noise level
• More nails per cycle: up to 81% more nails with each charge on a 20v/60v max battery

Specifications

• Drain valve type: ball drain valve
• Height: 15-1/2 in
• Length: 14 in
• Motor type: brushless
• Noise level: 80 dba‡
• Number of couplers: 1
• Peak horsepower: 0.4 hp
• Power tool type: cordless
• Pump lubrication: oil-free pump
• SCFM @ 90 psi: 1
• Tank pressure: 140 max psi
• Tank size: 2-1/2 gal
• Weight: 21-1/2 lbs

REFURBISHED - Tool will be marked with an "R"

Keep using the pneumatic tools you already have while enjoying the convenience and portability of cordless with the 20V MAX 2-1/2 Gallon Brushless Cordless Air Compressor. Each battery charge can sink over 850 nails, providing runtime to complete a variety of applications. Its One Turn Regulator means you won’t have to fight with the dial. Plus, it's made right here in the USA with global materials.

 Features

• Do more in less time: drive over 850 nails per charge
• Versatility and power: air delivery of 1.0 SCFM at 90 psi
• Fast and accurate pressure adjustments with OneTurn regulator
• Protect critical components with heavy-duty roll cage design
• The convenience of cordless: brushless motor with a heavy-duty oil-free pump
• Lightweight and portable: weighs only 21-1/2 lbs.
• Quiet operation: 80 dba operational noise level
• More nails per cycle: up to 81% more nails with each charge on a 20v/60v max battery

Specifications

• Drain valve type: ball drain valve
• Height: 15-1/2 in
• Length: 14 in
• Motor type: brushless
• Noise level: 80 dba‡
• Number of couplers: 1
• Peak horsepower: 0.4 hp
• Power tool type: cordless
• Pump lubrication: oil-free pump
• SCFM @ 90 psi: 1
• Tank pressure: 140 max psi
• Tank size: 2-1/2 gal
• Weight: 21-1/2 lbs

Clear drains with less setup. The 20V MAX XR Brushless Drain Snake is a cordless solution that uses the same battery and charger as your other 20V MAX tools. It comes equipped with a 5/16” x 25’ Black Oxide Drain Cable with Bulb Head, and the removable inner drum can accept up to 3/8” x 35’ cable for pipes up to 3”.

Features:

• Removable drum accepts up to 3/8" x 35' cable for use in up to 3" pipes
• Fixed outer shroud helps protect surfaces from rotating drum
• Pivoting LED light with 3 brightness modes to help provide illumination
• Sliding nose cone allows for quick locking/releasing of cable
• Ergonomic handle for comfortable grip
• Variable speed trigger with drill-style inline forward/reverse for ease of use

Includes:

• DCD200 Drain Snake
• DCD2005 5/16" X 25' Black Oxide Drain Cable with Bulb Head
• DCB203 2.0 Ah Battery
• DCB113 Charger
• Kitbox

Ideal for the mechanical and plumbing trades, the 20V MAX Transfer Pump (battery and charger sold separately) can transfer large amounts of water or water/glycol mixture to be used for a wide range of applications. Engineered with a self priming pump and a LED-embedded power switch, this cordless solution delivers quick performance and is designed with the ability to transfer a 60% water/40% propylene glycol mixture. Featuring an exceptional flow rate, lift, and head height, this TOOL CONNECT TAG READY (DEWALT Tag sold separately) tool offers a convenient lightweight construction for anyone needing to move water. Battery & Charger Sold Separately

Features:

• Application Versatility - Able to transfer a 60% water/40% propylene glycol mixture to help complete HVAC and refrigeration workflows.
• Exceptional Speed - Work quickly with a professional pump that is able to transfer up to 10 gal. per minute (GPM) using tap water.
• Professional Performance - Transfer up to 300 gallons of tap water and achieve a lift height up to 25 feet with tap water.
• Helps Maximize Tool Control - Prioritize control on the jobsite with a lightweight design, self-priming pump, and a LED-embedded power switch.
• Powerful Pump - Take on tough jobs with this tool able to achieve up to 4.5 GPM at 45 feet of head height using tap water, on average.
• TOOL CONNECT TAG READY - Featuring TOOL CONNECT TAG READY functionality (DEWALT Tag sold separately). Provides data on asset management and tool location when paired with the DEWALT Tag and the DEWALT Site Manager app.

Includes:

• (1) 20V MAX* Transfer Pump

The DEWALT Electrical Cable Cutting Tool Replacement Blade is used on the DCE150 Cable Cutting Tool. The hardened steel cutting blade provides long life, can be self-serviced, and is easily replaceable in the field.

FEATURES

• Cuts up to 750 MCM Copper and 1000 MCM Aluminum cableCan be easily serviced and replaced in the field

SPECIFICATIONS

• CABLE CAPACITY 750 MCM CU / 1000 MCM AL

INCLUDES

• (1) DCE1501 Cable Cutting Tool Replacement Blade

• Able to cut up to 750 MCM Copper and 1000 MCM Aluminum Cable
• Bright LED light to help illuminate cutting surface
• Cable Capacity: 750MCM Cu/11000 MCM Al
• Easily accessible forward/reverse switch
• Easily replaceable cutting blade

• Able to cut up to 750 MCM Copper and 1000 MCM Aluminum Cable
• Bright LED light to help illuminate cutting surface
• Cable Capacity: 750MCM Cu/11000 MCM Al
• Easily accessible forward/reverse switch
• Easily replaceable cutting blade

Features and Specifications:

• Cuts up to 750 MCM Copper
• Also cuts 1000 MCM Aluminum cable
• Hardened steel cutting blades ensure long service life
• Bright LED light illuminates the cutting surface
• Easy to replace cutting blade
• Padded shoulder strap with connection ring
• Easily accessible inline forward / reverse switch for one-handed operation
• Comfortable, durable rubber overmold grip
• Hang hook
• Height: 14″
• Length: 6-1/2″
• Weight: 6.7 lbs

Includes:

• DCE150B 20V Max Cable Cutting Tool
• DCB203 20V MAX Compact XR 2.0Ah Li-Ion Battery Pack
• DCB115 12V MAX – 20V MAX Battery Charger
• Shoulder Strap
• Hang Hook

REFURBISHED - Tool will be marked with an "R"

Features and Specifications:

• Cuts up to 750 MCM Copper
• Also cuts 1000 MCM Aluminum cable
• Hardened steel cutting blades ensure long service life
• Bright LED light illuminates the cutting surface
• Easy to replace cutting blade
• Padded shoulder strap with connection ring
• Easily accessible inline forward / reverse switch for one-handed operation
• Comfortable, durable rubber overmold grip
• Hang hook
• Height: 14″
• Length: 6-1/2″
• Weight: 6.7 lbs

Includes:

• DCE150B 20V Max Cable Cutting Tool
• DCB203 20V MAX Compact XR 2.0Ah Li-Ion Battery Pack
• DCB115 12V MAX – 20V MAX Battery Charger
• Shoulder Strap
• Hang Hook

The DCE151 20V MAX XR Brushless Cable Stripper is a dedicated, powered tool for cleanly and consistently stripping electrical cable up to 4" without an exposed knife. It quickly strips copper and aluminum cable from #6 AWG to 750 MCM Cu and 900 MCM Al. This kit includes a DCB203 20V MAX XR battery (2.0 AH), a charger, 20 quick release bushings, and a convenient kit box with storage. A bushing compatibility reference chart is included below. Put down the blade with this innovative solution for large diameter cable stripping.

The 20V MAX Cordless Cable Stripper helps speed jobsite productivity. We put it on the clock vs. a standard knife to prove it.

FEATURES

• Depth gauge consistently strips cables up to 4"
• Strip #6 - 750 MCM Cu/900 MCM Al Cable
• Quick release bushings allow you to quickly change bushings for each cable size
• Variable speed trigger with reverse for speed control
• Adjustable onboard LED light helps to provide illumination in dark or low light situations
• Kit box comes with convenient storage for tool, bushings, battery and charger
• E-Clutch system helps the user maintain control of the tool if it becomes jammed.
• Uses DEWALT bushings. Compatible with Greenlee and Ripley bushings.

SPECIFICATIONS

• AL CABLE CAPACITY RANGE #6 AWG TO 900 CM 
• CABLE TYPE THHN CU, XHHW CU, THHN AL, XHHW AL
• CU CABLE CAPACITY RANGE #6 AWG TO 750 MCM 
• DEPTH OF STRIP 4"
• LED LIGHT YES 
• POWER TOOL TYPE CORDLESS
• SYSTEM 20V MAX 
• TOOL HEIGHT 6.95 IN
• TOOL LENGTH 10.39 IN 
• TOOL WEIGHT 2.4 LBS

INCLUDES

• DCE151 Cable Stripper
• (1) DCB203 2 Ah battery
• Charger
• Bushings DCE1511-DCE1524
• Kit box

Complete a variety of mechanical and plumbing applications with the 20V MAX XR 1-1/4 in. Copper Tubing Cutter (DCE154). Designed to deliver a best-in-class cut capacity range, this tool helps maximize productivity with up to 550 cuts per charge. Cut both plumbing and HVACR copper tubing sizes with the auto-size adjust cut mechanism that allows the tool to be used with 1/4 in. – 1-1/4 in. copper tubing or pipe without swapping parts, including 3/8 in. outer diameter tubing for HVACR applications. As a part of DEWALT's best performing line of 20V MAX power tools, the durable 20V MAX XR 1-1/4 in. Copper Tubing Cutter features an innovative pivoting head that offers access to a wide range of cutting angles and a variable speed trigger for advanced user control. Battery & Charger Sold Separately.

Features:

• Best In Class Cut Capacity Range - Cut 1/4 in. - 1-1/4 in. types K, L, & M hard and soft copper tubing or pipe for versatile usage.
• Competitive Advantage - Cuts up to 2X faster than Milwaukee 2471 M12 Copper Tubing Cutter and there is 46% less cut clearance required vs. Milwaukee M12 Copper Tubing Cutter, 2471-20
• Auto-Size Adjust Cutting Head Mechanism - Cut different sizes of pipe without needing to swap out parts to do so.
• Innovative Pivoting Head - Access a wide range of angles with a pivoting head that offers 90° rotation.
• Help Maximize Productivity - Makes up to 550 cuts per charge.
• Cuts Fast - Cuts copper tubing in as little as 1.2 seconds.
• Durable Engineering - Take on tough jobsite environments with corrosion resistant cutting mechanism components.
• Help Optimize Tool Control - Match speed to application with a variable speed trigger that provides user control.
• Automatic Onboard LED - Help illuminate dim work areas with the integrated LED featuring on/off control.
• TOOL CONNECT CHIP READY - Featuring TOOL CONNECT CHIP READY functionality (DEWALT tag sold separately) when paired with the DEWALT Site Manager app that shows data on asset management and tool location.
• Part Of DEWALT's Best Performing Line Of 20V MAX Power Tools – Innovative power tools designed to deliver certainty for the world’s toughest pros.

Includes:

• (1) 20V MAX XR 1-1/4" Copper Tubing Cutter

Get clean, burr-free performance in plastic materials up to 2 inches with the 20V MAX Plastic Tubing Cutter that cuts up to 3 times faster. Delivering up to 400 cuts per charge, this tool features both automatic and manual cutting modes and an automatic LED to help optimize user control. With a D-handle style grip that provides a balanced grip and a corrosion-resistant stainless steel blade, the 20V MAX Plastic Tubing Cutter is built for efficiency and productivity on mechanical, electrical, and plumbing jobsites. Battery & Charger Sold Separately.

Features:

• Help Optimize Control - Maintain control during tough jobs with automatic and manual cutting modes.
• Onboard LED - Illuminate low-light work areas with the integrated automatic-LED.
• Fast, Versatile Performance - Cuts 2 in. schedule 80 PVC in up to 3 seconds.
• Built For Productivity - Makes up to 400 cuts per charge and cuts up to 3 times faster to help optimize productivity.
• Clean Cutting - Achieve clean, burr-free cuts.
• Durable Engineering - Take on harsh jobsite conditions with a stainless steel blade that is corrosion/rust resistant.
• Balanced Grip - Work precisely with a D-handle style grip that provides a balanced grip.
• Integrated Anchor Points - Fasten this tool to a workbench top with anchor points on the housing.
• TOOL CONNECT CHIP READY - Featuring TOOL CONNECT CHIP READY functionality (DEWALT Chip DCE042 sold separately) when paired with the DEWALT Chip to the DEWALT Site Manager app, providing data on asset management and tool location.

FEATURES

• Press 1/2" - 4" Copper Pipe and stainless steel
• Press 1/2" - 2" Black Carbon steel and PEX pipe
• Crimp Connect® software, an onboard intelligence system provides ability to print detailed reports of the date, time, force, and successfully completed cycles of the presses completed by the tool as well as the tools calibration and service history
• Onboard diagnostics indicates battery life, success of crimp, service needed and operating temperature range
• Easily accessible forward/reverse switch for ease of use
• Bright LED light helps to illuminate work area
• Shoulder strap and connection ring for portability

SPECIFICATIONS

• FORCE 4 TONS
• HANDLE CONFIGURATION PISTOL GRIP
• MATERIAL CARBON STEEL
• PIPE CAPACITY 4 IN
• POWER TOOL TYPE CORDLESS
• SYSTEM 20V MAX*
• TOOL HEIGHT 14 IN
• TOOL LENGTH 15.5 IN
• TOOL WEIGHT 7.16 LBS

INCLUDES

• DCE200
• (2) DCB204 4 Ah Li-Ion batteries
• DCE115 Charger
• Shoulder Strap
• Kitbox

REFURBISHED TOOL - TOOL WILL BE MARKED WITH "R"

FEATURES

• Press 1/2" - 4" Copper Pipe and stainless steel
• Press 1/2" - 2" Black Carbon steel and PEX pipe
• Crimp Connect® software, an onboard intelligence system provides ability to print detailed reports of the date, time, force, and successfully completed cycles of the presses completed by the tool as well as the tools calibration and service history
• Onboard diagnostics indicates battery life, success of crimp, service needed and operating temperature range
• Easily accessible forward/reverse switch for ease of use
• Bright LED light helps to illuminate work area
• Shoulder strap and connection ring for portability

SPECIFICATIONS

• FORCE 4 TONS
• HANDLE CONFIGURATION PISTOL GRIP
• MATERIAL CARBON STEEL
• PIPE CAPACITY 4 IN
• POWER TOOL TYPE CORDLESS
• SYSTEM 20V MAX*
• TOOL HEIGHT 14 IN
• TOOL LENGTH 15.5 IN
• TOOL WEIGHT 7.16 LBS

INCLUDES

• DCE200
• (2) DCB204 4 Ah Li-Ion batteries
• DCE115 Charger
• Shoulder Strap
• Kitbox

FEATURES

• Press 1/2" - 4" Copper Pipe and stainless steel
• Press 1/2" - 2" Black Carbon steel and PEX pipe
• Crimp Connect® software, an onboard intelligence system provides ability to print detailed reports of the date, time, force, and successfully completed cycles of the presses completed by the tool as well as the tools calibration and service history
• Onboard diagnostics indicates battery life, success of crimp, service needed and operating temperature range
• Easily accessible forward/reverse switch for ease of use
• Bright LED light helps to illuminate work area
• Shoulder strap and connection ring for portability

SPECIFICATIONS

• FORCE 4 TONS
• HANDLE CONFIGURATION PISTOL GRIP
• MATERIAL CARBON STEEL
• PIPE CAPACITY 4 IN
• POWER TOOL TYPE CORDLESS
• SYSTEM 20V MAX*
• TOOL HEIGHT 14 IN
• TOOL LENGTH 15.5 IN
• TOOL WEIGHT 7.16 LBS

INCLUDES

• DCE200
• Set of 6 Crimping heads: 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″
• (2) DCB204 4 Ah Li-Ion batteries
• DCE115 Charger
• Shoulder Strap
• Kitbox

NOTE: THIS KIT DOES NOT INCLUDE ANY JAWS

The DeWalt 20V MAX Compact Press Tool Kit (DCE210D2) provides broad press versatility in a lightweight, inline, design that allows for overhead and one-handed pressing in small spaces; making it an outstanding solution for the pipe trades. The DCE210 is compatible with all DeWalt compact series pressing attachments (sold separately). Onboard designs and features include a 180° rotating head allowing for best press angles, an LED work light for excellent press location visibility, Crimp Connect software to generate data from press cycles, a ram release button allowing for cycle reset, and a TOOL CONNECT Chip (DCE042) for tool inventory tracking via the TOOL CONNECT Platform. The DeWalt DCE210 is compatible with most professional-grade press fitting brands when used with the DEWALT compact series press attachments. Please reference the compatibility chart for complete listing. This Compact Press Tool utilizes the DeWalt 20V MAX battery system, joining 300+ products in the 20V MAX lineup that are engineered to meet the specific needs of demanding trades.

Features

• Ergonomics of a compact series press tool with the benefits of the 20V MAX platform
• Compatible with most professional-grade press fitting brands including Viega ProPress and MegaPress
• Compatible with all DeWalt Compact series press jaws
• Inline design for efficient one-handed jaw actuation
• 180° rotating head to obtain optimal press angle
• Crimp Connect onboard intelligence system provides reports on tool calibration history, number of remaining cycles until required service, as well as date and time reports of completed cycles when connected to Crimp Connect via the type-c USB port
• Tool Connect chip for Bluetooth enabled inventory tracking via the Tool Connect platform
• Ram release button allowing for cycle reset in case of jaw misalignment during press cycle
• Bright LED illumination of press location
• Shoulder strap hook for convenient portability