Dewalt

Complete finish, trim, and remodeling work with this ATOMIC Compact Series 20V MAX Brushless Cordless 23 Ga. Pin Nailer. The battery-powered nailer is designed to drive 23 Ga. pin nails measuring between 5/8 in. and 1-1/2 in. with its high-output brushless motor. Take advantage of cordless convenience as you seamlessly drive nails with no hoses, compressors, or gas cartridges required. Battery and charger not included.

Features

• Compatible with several sizes of fasteners: unit works with 23 ga. Pin nails from 5/8 up to 1-1/2 in. In length
• Designed for ease of use with tool-free jam release and tool-free depth adjust
• Know when to reload: low nail lockout system with led indicator to inform user when it’s time to reload
• Shots per charge: dcn623b drives 2,000 nails on average per charge

Includes

• (1) DCN623 DEWALT 20V MAX 23 Ga. Cordless Pin Nailer

FEATURES:

• Brushless Motor: Maximizes Runtime & Durability
• Magazine Orientation: Straight magazine – fastener length 1-1/4” and 2-1/2” 16ga
• Multi-functional LED’s: Workspace illumination, low battery and stall indicators
• Dual Operating Modes: Sequential for precision and Bump for faster operation
• Micro Nose: Improves Line of Sight & Accuracy of Nail Placement (Compared to DC616 & DCN660)
• Tool-Free Jam Release: To quickly and easily clear nail jams
• Tool-Free Stall Release: To quickly and easily clear nail jams
• Narrow Nose: Designed for clear line of sights and accuracy
• Tool-Free Depth Adjustment: For precise countersinking of nails
• Tool-Free Selector Switch: For sequential or Contact actuation modes
• Multifunctional LED Lights: Help to provide both workspace illumination and tool diagnostics
• Adjustable Belt Hook: For left or right attachment

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

FEATURES

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Brushless motor maximizes runtime and durability
• Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
• Tool-free depth adjustment for precise countersinking of nails
• Tool-free jam release to quickly and easily clear nail jams
• Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
• Tool-free selectable trigger for sequential or contact actuation modes
• Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
• Adjustable belt hook for left or right attachment depending on user preference
• Low nail lockout prevents dry firing and unwanted marks on the work material
• Compatible with all DEWALT 20V MAX* batteries

SPECIFICATIONS

• BELT / RAFTER HOOK: YES
• DEPTH ADJUSTMENT TOOL: FREE
• FASTENER LENGTH: 5/8 TO 2-1/8 IN
• FASTENER TYPE / GAUGE: 18 GAUGE BRAD NAILS
• FIRING / ACUTATION MODE: TOOL FREE SELECTABLE TRIGGER
• JAM CLEARANCE TOOL: FREE
• POWER TOOL TYPE: CORDLESS
• SYSTEM: 20V MAX
• TOOL HEIGHT: 11.8 IN
• TOOL LENGTH: 10.3 IN
• TOOL WEIGHT: 5.3 LBS
• TOOL WIDTH: 3.7 IN

INCLUDES

• DCN680 - Brad Nailer

The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4" narrow crown staples from 1/2" to 1-1/2" which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN681 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.͍

FEATURES

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Brushless motor maximizes runtime and durability
• Tool-free selectable trigger for sequential or contact actuation modes
• Tool-free depth adjustment for precise countersinking of staples
• Low nail lockout prevents dry firing and unwanted marks on the work material
• Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
• Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
• Adjustable belt hook for left or right attachment depending on user preference
• Bottom Load magazine for easy loading and removal of jammed fasteners
• Compatible with all DEWALT 20V MAX* batteries

SPECIFICATIONS

• Belt / Rafter Hook: Yes
• Depth Adjustment Tool Free
• Fastener Length: 1/2 To 1-1/2
• Fastener Type: Gauge: 18ga ¼” Narrow Crown Staples
• Firing / Acutation Mode Tool Free Selectable Trigger
• Jam Clearance Tool Free
• Power Tool Type: Cordless
• System: 20v Max
• Tool Height: 11.4
• Tool Length: 10.1
• Tool Weight: 5.7

The DEWALT 20V MAX Cordless Cable Stapler is built for residential wiring applications, primarily fastening Romex brand wires and cables. Made in the USA with global materials, this stapler has a proprietary cable guide that helps to drive staples over cable. The compact frame and lightweight design are ideal for tight spaces. A center-mounted LED light helps to eliminate shadows and illuminate the work area in low light conditions. Compatible with DEWALT DRS18100 1" insulated cable staples (sold separately). *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

FEATURES

• Proprietary cable guide to line up shots
• Center-mounted LED for workplace illumination
• Extended trigger provides easy use in multiple orientations
• Adjustable belt hook for left or right attachment depending on user preference
• Made in the USA with global materials
• Compatible with DEWALT DRS18100 1" Insulated Cable Staples (sold separately)
• Compatible with all DEWALT 20V MAX* batteries

SPECIFICATIONS

• TOOL HEIGHT 12 IN
• TOOL LENGTH 7.75 IN
• TOOL WEIGHT 4.7 LBS
• TOOL WIDTH 3 IN

INCLUDES

• Manual
• Belt Clip

NOTE: DCN8906 2-1/4 MAGAZINE ATTACHMENT IS AVAILABLE!

The 20V MAX XR 1in Magazine Cordless Concrete Nailer is built for drywall track installation into concrete and steel substrates. This fully electric nailer operates on the same battery as other DeWalt 20V MAX tools and eliminates the need to purchase fuel cells. A field-serviceable driver blade minimizes downtime. Variable power settings, small-profile 1in capacity magazine, and interchangeable nose pieces maximize versatility and convenience. LED work lights make this nailer shine in lowlight conditions. Compatible with DeWalt Cordless Concrete Nailer fasteners in lengths 1/2in – 1in. Kit includes standard/drywall nose piece and kit box. Compatible with DeWalt Cordless Concrete Nailer fasteners in lengths 1-1/4 – 2-1/4in when used with DCN8906 2” Accessory Magazine.

Features

• Combustion-free operation drives fasteners without need for fuel cells or powder loads
• Drives fasteners into concrete and steel substrates for application versatility
• Field-serviceable driver piston for easy maintenance
• Variable power settings for application versatility
• 1in compact magazine for improved access in tight areas and lighter weight (vs. DCN890)

Includes

• DCN890 20V MAX Cordless Concrete Nailer
• (1) DCN8904 Standard / Drywall Nose Piece
• Kit box

Complete a wide variety of framing jobs with the DEWALT 20V MAX Brushless Cordless 30º Paper Collated Framing Nailer. Designed to help minimize downtime between shots with an innovative flywheel that stays active for 6 seconds after the trigger is released, this lightweight cordless nailer removes the need for hoses and compressors. Install up to 530 sqft of subflooring per charge and complete up to 100 ft. of wall framing per charge with this next-generation tool that delivers powerful performance in a wide range of applications. Battery and charger sold separately.

Features

• CORDLESS CONVENIENCE - Pneumatic framing pros can save up to 20 min. daily in setup and clean-up time by switching from a pneumatic nailer to a DEWALT cordless framing nailer
• LIGHTWEIGHT DESIGN - Lighten your load on tough jobs with this tool that weighs only 8.65 lbs. (tool only)
• INNOVATIVE NOSE DESIGN - Align, grip, and drive nails at aggressive angles with the redesigned nose specifically built for “Toe-Nailing” applications
• HELP MINIMIZE DOWNTIME - Help minimize time between shots with Active Flywheel Technology in rapid sequential mode eliminating ramp-up time between shots
• QUICK SETUP - Show-up and get right to work with this cordless nailer requiring no compressors or hoses
• SIMPLIFY INVENTORY MANAGEMENT - Track and manage this Chip-Ready tool in the TOOL CONNECT system (Chip sold separately)
• NAIL CAPACITY - Take on tough jobs with up to a 3-1/2 in. nail capacity
• ON-SITE SERVICEABILITY - Limit maintenance delays with field serviceable springs and driver blade
• COMPATIBLE WITH EXTENDED MAGAZINE (DZN920) - Hold 2 strips of nails using an optional extended magazine (DZN920) constructed from high-grade magnesium (magazine sold separately)
• HELP MAXIMIZE PRODUCTIVITY - Install up to 530 sqft of subflooring per charge and complete up to 100 ft. of wall framing per charge
• POWERFUL PERFORMANCE - Finish a wide-range of applications with an powerful brushless motor
• UP TO 72% MORE SUB-FLUSH - Drive nails up to 72% more sub-flush than previous generation
• HIGH-STRENGTH MAGNESIUM MAGAZINE - High- strength magnesium magazine for durability

Includes 

• (1) DCN930 Nailer
• (1) Belt Hook and Screw
• (1) No Mar Tip
• (1) Hex Wrench
• (1) Manual

This 7 in. Rotary Polisher features a brushless motor for efficient performance and runtime. No-load speed of 800-2200 RPM with the variable speed trigger and dial allow for use in car, headlight, windshield, fiber glass, gelcoat and glass polishing applications. The included 7 in. backing plate is recommended for most applications.

This Pole Hedge Trimmer is designed to cut through a variety of landscape overgrowth. The pole hedge trimmer has a high output motor and 22 in. hardened steel laser-cut blades engineered for clean, fast cuts on branches up to 1 in. thick. The 7-position, 180⁰, articulating head allows you to customize cutting angles for hedges of any shape and size. When fully extended, the pole hedge trimmer can be extended up to a 12 ft. max reach**.

FEATURES

• 7- position, 180⁰ articulating head offers customized cutting angles for hedges of any shape and size
• 1 in. cutting capacity for superior cutting performance
• Up to 12 ft. max reach**
• 22 in. hardened steel laser cut dual action blade for fast cutting with 2800 spm
• 1 in. cutting gap for cutting performance on thick branches

SPECIFICATIONS

• CUTTING STROKES/MIN: 2800 SPM
• MAX CUTTING CAPACITY: 1 IN
• SYSTEM: 20 V
• TOOL LENGTH: 7 FT
• WEIGHT: 7.9 LBS

Complete challenging coring jobs with the 60V MAX 3-Speed Core Drill Kit that offers an epic power-to-weight ratio. As part of the PERFORM & PROTECT line of products, this Core Drill features the ANTI-ROTATION System that senses the rotational motion of the tool and shuts it down if the motion is excessive. Core up to 6-3/8 in. holes in reinforced concrete and use the 3-speed gear selector to help optimize performance. With close wall or ceiling clearance, this core drill and stand system helps create clean and tight pass throughs for pipe. This core drill has Wireless Tool Control with an activated remote control for water management and wireless communication to the the DCE6820 20V MAX Water Tank (sold separately). When you add the included DEWALT POWERSHIFT stand with removable wheels and slim base to easily access tight spaces, the 60V MAX 3-Speed Core Drill is part of the DEWALT POWERSHIFT line up, making it the ultimate choice for tough coring applications.

Features:

• Core Reinforced Concrete - Take on heavy-duty jobs with a 6-3/8 in coring capacity
• Part Of The PERFORM & PROTECT Line - Equipped with ANTI-ROTATION system that senses rotational motion of the tool and shuts it down if the motion is excessive
• Core Drill Only: Integrated TOOL CONNECT+ Technology - This 60V MAX 6-3/8 in Core Drill delivers fully integrated connectivity with the DEWALT Site Manager app, providing users with data on asset management, tool location, utilization, and safety
• Help Optimize Performance - Match your coring performance to bit size with the 3-speed gear selector
• Versatile Handle - Stay in control during handheld coring with a removable and rotatable side handle
• Wireless Tool Control - Activated remote control for water management and wireless communication to the DCE6820 DEWALT 20V MAX Water Tank (sold separately)
• Designed to Help Minimize Fatigue - Equipped with a lock-on switch that enables the user to turn on the core drill and go without holding down the trigger for the entirety of the application (to be used for stand-mounted core drilling only)
• Stand Only: TOOL CONNECT TAG READY Technology - The DEWALT POWERSHIFT Core Drill Stand comes comes TOOL CONNECT TAG READY (DEWALT Tag sold separately) providing users with insights on asset management and tool location via the DEWALT Site Manager(TM) app
• Integrated Vacuum Base - Connect your core drill to the ground or work surface with the vacuum pump hose connection that allows for a quick, secure set-up
• Ease-Of- Transport - Simplify stand transportation with removable wheels that can be taken off to reduce base length
• Angular Coring Options - Adjust the angle from -5 to +45 degrees and tighten with integrated ratchet
• Efficient Height Adjustments - Measure the height of the drill carriage with on-tool laser etched measurements located on the outer stand mast
• Level Operation -Easily level out the base of the stand with leveling eyebolts and a bubble level
• Convient Water Rate Adjustments - Quickly adjust the water flow during wet drilling applications with the durable top mounted water regulation lever
• Part of the DEWALT POWERSHIFT System - Innovative cordless equipment for Site Prep, Placement, Coring, and more

Applications:

• Wall and floor-mounted pipe penetration in concrete
• Rebar doweling
• Masonry drilling pipe penetration
• Strength test holes in concrete
• Passageways in reinforced and non-reinforced concrete

Includes:

• (1) DCD150 60V MAX 6-3/8 in. Core Drill
• (1) DCPS151 Core Drill Stand
• (2) DCBPS0554 554 Wh Batteries
• (1) DCBPSC0550 550W Charger
• (1) Core Bit Reducer
• (1) 36mm Wrench
• (1) 41mm Wrench
• (1) Quick Connect Hose Connection
• (1) Wireless Tool Control Remote
• (1) Drop-in Anchor Kit

Tackle demanding placement applications with the DEWALT POWERSHIFT Backpack Vibrator that delivers unrivaled power, ergonomics, and runtime. Ideal for stiff slumps, this powerful cordless vibrator provides up to 2-1/4 in. head performance and a consistent 12,000 VPM. The ergonomically designed hi-vis harness is designed to accommodates users with sizes from XS to XXXL length torsos, features adjustable straps, and gives the user the ability to raise or lower the back pad to help limit fatigue. This vibrator is compatible with 16 DEWALT head and shaft combinations including 1-1/2 in., 1.3/4 in., 2 in. and 2-1/4 in. heads and shafts at 7 ft., 10 ft., 16 ft., and 21 ft. (heads and shafts sold separately).

Features:

• Left or Right Side Positionable Controls - Work comfortably with controls that can be mounted on either side of the harness at various heights.

• Lightweight Design - Take advantage of a lightweight 25 lbs. design with the DEWALT POWERSHIFT Battery (DCBPS0554 battery sold separately).

• Integrated TOOL CONNECT+ Technology - The DEWALT POWERSHIFT Backpack Vibrator delivers fully integrated connectivity with the DEWALT Site Manager app, providing users with data on asset management, tool location, and utilization.
  

• Wide Range of Heads and Shafts - compatible with a full assortment of quick-change DEWALT heads and shafts including 1-1/2 in. – 2-1/4 in. (heads) and 7 ft. – 21 ft. (shafts) (all heads and shafts sold separately).
  

• Tool weight including a POWERSHIFT 554wh battery is 28 lbs.
  

Tackle demanding placement applications with the DEWALT POWERSHIFT™ Vibrator Kit that delivers the power, ergonomics, and runtime needed to complete a days work. Ideal for stiff slumps, this powerful cordless vibrator provides up to 2-1/4 in. head performance and a consistent 12,000 VPM. This vibrator is optimized for structural concrete work including columns, walls, as well as footers and piers with its robust roll cage and wireless tool control functionality. This vibrator is compatible with 16 DEWALT head and shaft combinations including 1-1/2 in., 1.3/4 in., 2 in. and 2-1/4 in. heads and shafts at 7 ft., 10 ft., 16 ft., and 21 ft. (all heads and shafts sold separately).

Features:

• Advanced Module - Maintain constant VPM until the battery is fully depleted
• Wireless Tool Control - Activated remote control for water management and wireless communication to other DEWALT products
• Integrated TOOL CONNECT+ Technology - The DEWALT POWERSHIFT Vibrator delivers fully integrated connectivity with the DEWALT Site Manager app, providing users with data on asset management, tool location, and utilization
• Seamless Transport - Connect provided strap for seamless transport with integrated carry harness connection points
• Durable Roll Cage - Helps withstand tough jobsite conditions with a durable roll cage
• Wide Range of Heads and Shafts - compatible with a full assortment of quick-change DEWALT heads and shafts including 1-1/2 in – 2-1/4 in (heads) and 7 ft – 21 ft (shafts) (all heads and shafts sold separately)
• Quick-Change Connection - Simply push in the desired shaft and twist the collar to remove
• State-of-Charge Indicator - Keep track of a low battery charge with the low charge indicator light located on the controls
• Part of the DEWALT POWERSHIFT System - Innovative cordless equipment for Site Prep, Placement, Coring, and more

Applications:

• Vibrating concrete

Specifications:

• Product Length [Imperial]: 22 in
• Product Width [Metric]: 28 cm
• Overall Length [Imperial]: 24 in
• Tool Weight [Imperial]: 12 lbs
• Tool Weight [Metric]: 5.4 Kg
• Product Width [Imperial]: 11 in
• Product Weight [Metric]: 6 Kg
• Product Height [Imperial]: 12 in
• Product Height [Metric]: 30 cm
• Battery Chemistry: Lithium Ion
• Overall Length [Metric]: 58 cm
• Battery System: DEWALT POWERSHIFT
• Number of Pieces: 5
• Product Pack Quantity: 2
• No Load Vibrations Per Minute (VPM): 12,000
• Product Length [Metric]: 55 mm
• Product Weight [Imperial]: 14 lbs
• Is it a Set: Yes

Includes:

• (1) DCPS320 Vibrator
• (2) DCBPS0554 554 Wh Batteries
• (1) DCBPSC0550 550W Charger
• (1) Wireless Tool Control Remote

Level and smooth the surfaces of stiff and slumped concrete with the DEWALT POWERSHIFT Concrete Power Screed. With a variable speed trigger that offers 0 – 7,800 VPM, this tool has the power to break a fresh, cold joint. Designed ergonomically for long days, the DEWALT POWERSHIFT Power Screed features adjustable handlebars, controls that can be mounted on the left or right side, as well as rotate 180 degrees. For versatile performance, this cordless screed has a direct bolt up for 9 in. hole spaced L-Shape bars and includes adapters to support 3 of the most commonly used bar/board styles.

Features:

• Left or Right Side Positionable Controls - Mount controls featuring alignment marks to indicate both sides are set the same on either handle.
• Help Optimize Performance - Control vibration based on the slump with a variable speed trigger offering  0 – 7,800 VPM and lock-on at full speed.
• Integrated TOOL CONNECT+ Technology - The DEWALT POWERSHIFT Screed delivers fully integrated connectivity with the DEWALT Site Manager app*, providing users with data on asset management, tool location, and utilization.
• Convenient Onboard Storage - Store the wrench used for adjusting the handle in the onboard storage area.

Includes:

• (1) DCPS330 Concrete Power Screed
• (2) DCBPS0554 554Wh Batteries
• (1) DCBPSC0550 550W Charger
• (1) Mounting Hardware
• (2) Adapters

Operate both your DEWALT POWERSHIFT VIbrator and Backpack Vibrator with the DEWALT POWERSHIFT Head and Shaft offerings. Available for a wide range of concrete placement applications, these heads and shafts come in 16 different product combination offerings including 1.5 in., 1.75 in., 2 in., and 2.25 in. for heads and 7 ft., 10 ft., 16 ft., and 21 ft. for shafts. All Heads Produce 12,000VPM at 200Hz.

Features:

• Large Range of Sizes - Complete a wide range of concrete placement applications with 4 different heads and shafts sizes and 16 different product combination offerings
• Quick-Change Connection - Simply push in the desired shaft and twist the collar to remove
• High Performance - Take on tough jobs with up to 12,000 VPM capacity
• Consistent Vibration - Maintain performance with high-frequency heads
• Part of the DEWALT POWERSHIFT System - Innovative cordless equipment for Site Prep, Placement, Coring and more

Applications:

• Vibrating concrete

Specifications:

• Product Length [Imperial]: 84 in
• Product Weight [Metric]: 6 Kg
• Number of Pieces: 1
• Product Pack Quantity: 1
• No Load Vibrations Per Minute (VPM): 12000
• Product Length [Metric]: 2 meters mm
• Product Weight [Imperial]: 13 lbs

Operate both your DEWALT POWERSHIFT VIbrator and Backpack Vibrator with the DEWALT POWERSHIFT Head and Shaft offerings. Available for a wide range of concrete placement applications, these heads and shafts come in 16 different product combination offerings including 1.5 in., 1.75 in., 2 in., and 2.25 in. for heads and 7 ft., 10 ft., 16 ft., and 21 ft. for shafts. All Heads Produce 12,000VPM at 200Hz.

Features:

• Large Range of Sizes - Complete a wide range of concrete placement applications with 4 different heads and shafts sizes and 16 different product combination offerings
• Quick-Change Connection - Simply push in the desired shaft and twist the collar to remove
• High Performance - Take on tough jobs with up to 12,000 VPM capacity
• Consistent Vibration - Maintain performance with high-frequency heads
• Part of the DEWALT POWERSHIFT System - Innovative cordless equipment for Site Prep, Placement, Coring and more

Applications:

• Vibrating concrete

Specifications:

• Product Length [Imperial]: 192 in
• Product Weight [Metric]: 13 Kg
• Number of Pieces: 1
• Product Pack Quantity: 1
• No Load Vibrations Per Minute (VPM): 12000
• Product Length [Metric]: 5 meters mm
• Product Weight [Imperial]: 28 lbs

• Large Range of Sizes - Complete a wide range of concrete placement applications with 4 different heads and shafts sizes and 16 different product combination offerings
• Quick-Change Connection - Simply push in the desired shaft and twist the collar to remove
• High Performance - Take on tough jobs with up to 12,000 VPM capacity
• Consistent Vibration - Maintain performance with high-frequency heads
• Part of the DEWALT POWERSHIFT System - Innovative cordless equipment for Site Prep, Placement, Coring and more

Applications:

• Vibrating concrete

Specifications:

• Product Length [Imperial]: 192 in
• Product Weight [Metric]: 8 Kg
• Number of Pieces: 1
• Product Pack Quantity: 1
• No Load Vibrations Per Minute (VPM): 12000
• Product Length [Metric]: 5 meters mm
• Product Weight [Imperial]: 18 lbs

Operate both your DEWALT POWERSHIFT VIbrator and Backpack Vibrator with the DEWALT POWERSHIFT Head and Shaft offerings. Available for a wide range of concrete placement applications, these heads and shafts come in 16 different product combination offerings including 1.5 in., 1.75 in., 2 in., and 2.25 in. for heads and 7 ft., 10 ft., 16 ft., and 21 ft. for shafts. All Heads Produce 12,000VPM at 200Hz

Features:

• Large Range of Sizes - Complete a wide range of concrete placement applications with 4 different heads and shafts sizes and 16 different product combination offerings.

• Quick-Change Connection - Simply push in the desired shaft and twist the collar to remove.

• High Performance - Take on tough jobs with up to 12,000 VPM capacity.

• Consistent Vibration - Maintain performance with high-frequency heads.

Operate both your DEWALT POWERSHIFT VIbrator and Backpack Vibrator with the DEWALT POWERSHIFT Head and Shaft offerings. Available for a wide range of concrete placement applications, these heads and shafts come in 16 different product combination offerings including 1.5 in., 1.75 in., 2 in., and 2.25 in. for heads and 7 ft., 10 ft., 16 ft., and 21 ft. for shafts. All Heads Produce 12,000VPM at 200Hz.

Features:

• Large Range of Sizes - Complete a wide range of concrete placement applications with 4 different heads and shafts sizes and 16 different product combination offerings
• Quick-Change Connection - Simply push in the desired shaft and twist the collar to remove
• High Performance - Take on tough jobs with up to 12,000 VPM capacity
• Consistent Vibration - Maintain performance with high-frequency heads
• Part of the DEWALT POWERSHIFT System - Innovative cordless equipment for Site Prep, Placement, Coring and more

Applications:

• Vibrating concrete

Specifications:

• Product Length [Imperial]: 120 in
• Product Weight [Metric]: 10 Kg
• Number of Pieces: 1
• Product Pack Quantity: 1
• No Load Vibrations Per Minute (VPM): 12000
• Product Length [Metric]: 3 meters mm
• Product Weight [Imperial]: 23 lbs

Operate both your DEWALT POWERSHIFT VIbrator and Backpack Vibrator with the DEWALT POWERSHIFT Head and Shaft offerings. Available for a wide range of concrete placement applications, these heads and shafts come in 16 different product combination offerings including 1.5 in., 1.75 in., 2 in., and 2.25 in. for heads and 7 ft., 10 ft., 16 ft., and 21 ft. for shafts. All Heads Produce 12,000VPM at 200Hz.

Features:

• Large Range of Sizes - Complete a wide range of concrete placement applications with 4 different heads and shafts sizes and 16 different product combination offerings
• Quick-Change Connection - Simply push in the desired shaft and twist the collar to remove
• High Performance - Take on tough jobs with up to 12,000 VPM capacity
• Consistent Vibration - Maintain performance with high-frequency heads
• Part of the DEWALT POWERSHIFT System - Innovative cordless equipment for Site Prep, Placement, Coring and more

Applications:

• Vibrating concrete

Specifications:

• Product Length [Imperial]: 192 in
• Product Weight [Metric]: 13 Kg
• Number of Pieces: 1
• Product Pack Quantity: 1
• No Load Vibrations Per Minute (VPM): 12000
• Product Length [Metric]: 5 meters mm
• Product Weight [Imperial]: 28 lbs